Enclosures and housings
Sheet-Metal Stencil Storage Cart Body
- Bounding box
- 900.0 × 800.0 × 875.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Sheet-metal stencil storage cart body, steel 1.5 mm wall thickness. All dimensions in millimeters. X = length, Y = width, Z = height. Body occupies X 0 to 900, Y 0 to 800, Z 0 to 875. The face at Y = 0 (front, along X) is fully open for the lower cabinet and for the upper horizontal slot. The back (Y = 800), left (X = 0) and right (X = 900) sides are closed walls. Bottom plate: Z 0 to 20, full footprint. Cabinet top plate: Z 780 to 790, full footprint. Internal cabinet cavity: Z 20 to 780 (760 tall), Y 0 to 800. Stencil zone, X 20 to 500: 8 slots, pitch 60 mm. Each slot is formed by two thin guide fins, 1.5 mm thick, with 40 mm clear gap between them, placed at X = 20 + 60*n and X = 60 + 60*n (n = 0 to 7). The fins run along Y for the full 760 mm depth. Bottom fins stand 20 mm tall on the bottom plate and matching top fins hang 20 mm down from the cabinet top plate. No solid dividers. Utility zone, X 580 to 880: a vertical partition wall 1.5 mm thick at X = 580, full cabinet depth and height (Z 20 to 780). Inside this zone: - empty bin space Z 20 to 480 (300 wide, 760 deep, 460 tall, open to the front); - two shelf plates, each 10 mm thick, full zone width and full depth: Z 480 to 490 and Z 630 to 640. Space X 500 to 580 is empty. Horizontal stencil slot (above the cabinet): Z 790 to 830, X 0 to 900, Y 0 to 800, open at the front (Y = 0). Floor is the cabinet top plate. Ceiling is a plate Z 830 to 840, full footprint. Inside the slot: two guide strips 1.5 mm thick, 40 mm tall, running along Y from Y = 0 to Y = 726.5, at X 68.5 to 70 and X 830 to 831.5 (760 mm clear gap between them), and one stopper bar 1.5 mm thick, Y 725 to 726.5, X 70 to 830, Z 790 to 830. Top tray: raised rim 1.5 mm thick, 35 mm tall (Z 840 to 875), around all four edges of the ceiling plate. No cut-outs in the rim.Cart body (not part of this model) is the box X 0 to 900, Y 0 to 800, Z 0 to 875.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length (X) | 900 mm | 400 – 2000 |
| Body Width (Y) | 800 mm | 300 – 2000 |
| Body Height (Z) | 875 mm | 500 – 2000 |
| Sheet Thickness | 1.5 mm | 0.5 – 3 |
| Bottom Plate Height | 20 mm | 5 – 60 |
| Cabinet Top Plate Bottom Z | 780 mm | 300 – 1500 |
| Cabinet Top Plate Thickness | 10 mm | 3 – 40 |
| Horizontal Slot Clear Height | 40 mm | 10 – 200 |
| Slot Ceiling Plate Thickness | 10 mm | 3 – 40 |
| First Fin X | 20 mm | 0 – 300 |
| Slot Pitch | 60 mm | 20 – 150 |
| Slot Count | 8 pcs | 1 – 20 |
| Fin Pair Offset | 40 mm | 5 – 59 |
| Fin Thickness | 1.5 mm | 0.5 – 5 |
| Fin Height | 20 mm | 5 – 80 |
| Fin Length (Y) | 800 mm | 100 – 2000 |
| Partition Wall X | 580 mm | 100 – 1500 |
| Utility Zone End X | 880 mm | 150 – 2000 |
| Shelf Plate Thickness | 10 mm | 3 – 40 |
| Lower Shelf Bottom Z | 480 mm | 40 – 1500 |
| Upper Shelf Bottom Z | 630 mm | 40 – 1500 |
| Left Guide Strip X | 68.5 mm | 0 – 500 |
| Right Guide Strip X | 830 mm | 100 – 2000 |
| Guide Strip Length (Y) | 726.5 mm | 50 – 2000 |
| Guide Strip Height | 40 mm | 5 – 200 |
| Stopper Bar Y | 725 mm | 10 – 2000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no