Enclosures and housings
Sheet-Metal Stencil Cart with Handrail
- Bounding box
- 1035.0 × 935.0 × 825.0 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
update Sheet-metal stencil storage cart body, steel 1.5 mm wall thickness. All dimensions in millimeters. X = length, Y = width, Z = height. Body occupies X 0 to 900, Y 0 to 800, Z 0 to 825. The face at Y = 0 (front, along X) is fully open. The back (Y = 800), left (X = 0) and right (X = 900) sides are closed walls. Bottom plate: Z 0 to 20, full footprint. Top plate: Z 780 to 790, full footprint. Internal cavity: Z 20 to 780 (760 tall), Y 0 to 800. Stencil zone, X 20 to 500: 8 slots, pitch 60 mm. Each slot is formed by two thin guide fins, 1.5 mm thick, with 40 mm clear gap between them, placed at X = 20 + 60*n and X = 60 + 60*n (n = 0 to 7). The fins run along Y for the full 760 mm depth. Bottom fins stand 20 mm tall on the bottom plate and matching top fins hang 20 mm down from the top plate. No solid dividers. Utility zone, X 580 to 880: a vertical partition wall 1.5 mm thick at X = 580, full depth and height. Inside this zone: - empty bin space Z 20 to 320 (300 x 300 mm, open to the front); - three shelf plates, each 10 mm thick, full zone width and full depth: Z 320 to 330, Z 470 to 480, Z 620 to 630. Space X 500 to 580 is empty. Top tray: raised rim 1.5 mm thick, 35 mm tall (Z 790 to 825), around all four edges of the top plate. No cut-outs in the rim. Rectangular handrail loop made of round steel tube, outer diameter 25 mm. All dimensions in millimeters. X = length, Y = width, Z = height. The loop is a horizontal rectangle, tube centerline from X -55 to 955 and Y -55 to 855, at centerline height Z = 810, with rounded corners of radius 40 mm on the centerline. Eight short support arms, round bar outer diameter 12 mm, each 55 mm long, connect the loop to the cart body walls at Z = 810: - on the front (Y = 0) and back (Y = 800) sides at X = 200 and X = 700; - on the left (X = 0) and right (X = 900) sides at Y = 200 and Y = 600. Cart body (not part of this model) is the box X 0 to 900, Y 0 to 800.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length (X) | 900 mm | 400 – 1500 |
| Outer Width (Y) | 800 mm | 300 – 1200 |
| Outer Height (Z) | 825 mm | 300 – 1500 |
| Wall Thickness | 1.5 mm | 0.8 – 5 |
| Bottom Plate Height | 20 mm | 5 – 100 |
| Top Plate Thickness | 10 mm | 2 – 50 |
| Internal Cavity Height | 760 mm | 100 – 1200 |
| Internal Cavity Depth | 760 mm | 100 – 1100 |
| Tray Rim Thickness | 1.5 mm | 0.8 – 5 |
| Fin Thickness | 1.5 mm | 0.8 – 5 |
| Fin Height | 20 mm | 5 – 100 |
| Slot Count | 8 | 1 – 20 |
| Slot Pitch | 60 mm | 20 – 200 |
| First Slot X Offset | 20 mm | 0 – 300 |
| Fin Pair Offset | 40 mm | 10 – 150 |
| Partition X | 580 mm | 100 – 850 |
| Partition Thickness | 1.5 mm | 0.8 – 5 |
| Shelf Thickness | 10 mm | 2 – 50 |
| Shelf 1 Bottom Z | 320 mm | 50 – 750 |
| Shelf 2 Bottom Z | 470 mm | 50 – 750 |
| Shelf 3 Bottom Z | 620 mm | 50 – 750 |
| Utility Zone End X | 880 mm | 200 – 890 |
| Handrail Tube OD | 25 mm | 10 – 60 |
| Support Arm OD | 12 mm | 5 – 30 |
| Support Arm Length | 55 mm | 10 – 200 |
| Handrail Overhang | 55 mm | 10 – 200 |
| Loop Corner Radius | 40 mm | 10 – 100 |
| Handrail Centerline Z | 810 mm | 700 – 900 |
| Support X1 | 200 mm | 0 – 900 |
| Support X2 | 700 mm | 0 – 900 |
| Support Y1 | 200 mm | 0 – 800 |
| Support Y2 | 600 mm | 0 – 800 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no