Enclosures and housings
Sheet-Metal Cart Body with Guide Slots and Hand-Hold Tray
- Bounding box
- 900.0 × 800.0 × 825.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
create Sheet-metal cart body, steel 1.5 mm thick, closed on the back long side and both short ends, open on the front long side. Dimensions in millimeters. Outer size: length 900 along X, width 800 along Y, height 825 along Z. Bottom plate 20 mm high at Z 0 to 20. Top plate 10 mm thick at Z 780 to 790. Internal compartment height 760 (Z 20 to 780), internal width 760 along Y. Inside, 8 slots arranged along X, pitch 60 mm, starting 20 mm from one short end. Each slot is formed by two thin vertical guide fins 1.5 mm thick, 40 mm clear gap between them, running across Y for the full 760 mm width. Bottom fins stand 20 mm tall on the bottom plate; matching top fins hang 20 mm down from the top plate. No solid dividers. Remaining space of about 300 mm along X at the other short end is empty (bin area). On top, a shallow tray: raised rim 35 mm high (Z 790 to 825) around all four edges, rim 1.5 mm thick.Add hand-hold slots to the tray rim: on each of the four sides, one rounded slot 120 mm long by 20 mm high, centered on the rim, cut through the rim wall. Keep all other dimensions unchanged.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length (X) | 900 mm | 300 – 2000 |
| Outer width (Y) | 800 mm | 200 – 1500 |
| Outer height (Z) | 825 mm | 200 – 1500 |
| Sheet / wall thickness | 1.5 mm | 0.5 – 4 |
| Bottom plate height | 20 mm | 5 – 80 |
| Compartment internal height | 760 mm | 100 – 1200 |
| Top plate thickness | 10 mm | 2 – 40 |
| Internal width (Y, fin length) | 760 mm | 100 – 1400 |
| Number of slots | 8 pcs | 1 – 20 |
| Slot pitch (X) | 60 mm | 20 – 200 |
| First slot offset from short end | 20 mm | 2 – 200 |
| Clear gap between fin pair | 40 mm | 5 – 200 |
| Guide fin thickness | 1.5 mm | 0.5 – 5 |
| Fin height (top & bottom rows) | 20 mm | 5 – 100 |
| Tray rim thickness | 1.5 mm | 0.5 – 5 |
| Hand-hold slot length | 120 mm | 20 – 300 |
| Hand-hold slot height | 20 mm | 5 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no