3D preview of SG90 Progressive Pinch Clamp
Loading the interactive model…
Interactive 3D model of SG90 Progressive Pinch Clamp

Brackets and mounts

SG90 Progressive Pinch Clamp

2 views
Bounding box
72.2 × 34.0 × 19.0 mm
Engine
Precision B-rep
Parameters
28
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

// Custom SG90 Progressive Pinch Clamp for 4.0 mm OD Pipe (Variable Wall Thickness) $fn = 60; // --- Tube & Servo Parameters --- tube_od = 4.0; min_pinch_gap = 1.0; // Safe minimum gap at 180 degrees (suits 0.5 mm to 0.85 mm walls) servo_len = 23.2; // SG90 body length + tolerance servo_wid = 12.6; // SG90 body width + tolerance flange_span = 27.5; // Mounting screw hole center-to-center // --- Geometry Calculations --- base_thick = 5.0; wall_height = 14.0; anvil_y = 14.5; // Distance from servo shaft center to backing wall channel_w = tube_od + 0.4; // 4.4 mm slot for easy snap-in fit r_open = anvil_y - (tube_od + 0.4); // 10.1 mm (fully open at 0 deg) r_closed = anvil_y - min_pinch_gap; // 13.5 mm (1.0 mm gap at 180 deg) // 1. Main Bracket Body module bracket() { difference() { union() { // Base plate cube([44, 34, base_thick]); // Tube backing anvil wall translate([0, 26, base_thick]) cube([44, 8, wall_height]); } // SG90 Servo Body Cutout translate([6, 4, -1]) cube([servo_len, servo_wid, base_thick + 2]); // SG90 Mounting Screw Pilot Holes (1.8 mm) translate([6 + servo_len/2 - flange_span/2, 4 + servo_wid/2, -1]) cylinder(d=1.8, h=base_thick + 2); translate([6 + servo_len/2 + flange_span/2, 4 + servo_wid/2, -1]) cylinder(d=1.8, h=base_thick + 2); // Snap-in Tube Channel along the Anvil Wall translate([-1, 26 - channel_w/2 + 2, base_thick + 3]) cube([46, channel_w, wall_height]); } // Retention lip to keep the 4 mm pipe seated translate([0, 24.5, base_thick + 3 + channel_w]) cube([44, 2.5, 2.0]); } // 2. Smooth 180-Degree Progressive Spiral Cam module progressive_cam() { cam_h = 7.0; steps = 18; // 10 degrees per step for smooth flow throttling difference() { union() { for (i = [0 : steps - 1]) { a1 = i * (180 / steps); a2 = (i + 1) * (180 / steps); rad1 = r_open + (r_closed - r_open) * (i / steps); rad2 = r_open + (r_closed - r_open) * ((i + 1) / steps); hull() { cylinder(r=5, h=cam_h); rotate([0, 0, a1]) translate([rad1 - 2.5, 0, 0]) cylinder(r=2.5, h=cam_h); rotate([0, 0, a2]) translate([rad2 - 2.5, 0, 0]) cylinder(r=2.5, h=cam_h); } } } // Center shaft clearance hole (7.5 mm) translate([0, 0, -1]) cylinder(d=7.5, h=cam_h + 2); // Recess pocket for stock SG90 single-arm horn translate([-3.5, -2.6, cam_h - 2.2]) cube([19.0, 5.2, 3.0]); } } // Render Layout (Bracket at origin, Cam placed neatly beside it) bracket(); translate([62, 17, 0]) progressive_cam();

Parameters

NameValueRange
Bracket Length44 mm25 – 90
Bracket Width34 mm20 – 80
Base Thickness5 mm2 – 12
Anvil Wall Thickness8 mm3 – 20
Anvil Wall Height14 mm5 – 40
Servo Pocket Length23.2 mm10 – 45
Servo Pocket Width12.6 mm8 – 30
Servo Pocket X Offset6 mm0 – 25
Servo Pocket Y Offset4 mm0 – 25
Flange Hole Span27.5 mm10 – 50
Pilot Hole Diameter1.8 mm1 – 5
Tube Channel Width4.4 mm2.5 – 10
Channel Bottom Height8 mm5.5 – 25
Tube OD4 mm2 – 10
Retention Lip Length3 mm1 – 8
Retention Lip Thickness2 mm1 – 6
Cam Height7 mm3 – 20
Cam Radius Open (0 deg)10.1 mm6 – 25
Cam Radius Closed (180 deg)13.5 mm7 – 35
Shaft Clearance Bore7.5 mm3 – 14
Cam Hub Radius6.5 mm4 – 14
Cam Sweep Angle180 deg90 – 300
Horn Recess Length19 mm5 – 35
Horn Recess Width5.2 mm2 – 14
Horn Recess Depth2.2 mm0.5 – 5
Horn Recess X Offset-3.5 mm-15 – 10
Layout Gap (X)62 mm58 – 150
Cam Y Offset17 mm-30 – 60

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.