Brackets and mounts
SG90 Pan-Tilt Bracket
- Bounding box
- 60 × 40 × 70.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 43
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
SG90 Servo bracket to surface, SG90 Servo Bracket to another SG90 attatchement, Sample object bracket to SG90 attatchment. Pan and Tilt concept.
Parameters
| Name | Value | Range |
|---|---|---|
| Servo body width | 23 mm | 20 – 26 |
| Servo body depth | 12.5 mm | 10 – 16 |
| Servo body height | 22.5 mm | 20 – 26 |
| Servo mounting hole spacing | 27.5 mm | 25 – 30 |
| Servo mounting screw hole diameter | 2.2 mm | 2 – 3.5 |
| Servo shaft clearance | 6 mm | 4 – 8 |
| Base width | 50 mm | 30 – 80 |
| Base depth | 40 mm | 30 – 70 |
| Base height | 26.5 mm | 20 – 40 |
| Base top plate thickness | 4 mm | 2 – 8 |
| Base corner fillet | 3 mm | 0 – 8 |
| Base mounting hole diameter | 3.4 mm | 2.5 – 5 |
| Base mounting hole inset | 6 mm | 3 – 12 |
| Pan hub recess diameter | 20 mm | 12 – 30 |
| Pan hub recess depth | 1 mm | 0.5 – 3 |
| Base screw counterbore diameter | 6 mm | 3 – 12 |
| Base screw counterbore depth | 2 mm | 0 – 6 |
| Pan platform width | 44 mm | 30 – 70 |
| Pan platform depth | 36 mm | 25 – 60 |
| Pan platform thickness | 3.5 mm | 2 – 6 |
| Pan hub outer diameter | 19.4 mm | 12 – 28 |
| Pan hub screw clearance | 6 mm | 3 – 10 |
| Pan hub overlap into base | 0.5 mm | 0 – 1 |
| Tilt tower X position | 14 mm | 8 – 20 |
| Tilt tower thickness | 4 mm | 2 – 8 |
| Tilt tower width | 34 mm | 24 – 50 |
| Tilt tower height | 36 mm | 20 – 60 |
| Tilt axis height | 52.5 mm | 30 – 90 |
| Add SG90 horn screw pattern (0/1) | 1 mm | 0 – 1 |
| Horn screw hole spacing | 6 mm | 3 – 14 |
| Horn screw hole diameter | 2.2 mm | 1.5 – 3.5 |
| Tilt plate width | 36 mm | 20 – 60 |
| Tilt plate height | 36 mm | 20 – 60 |
| Tilt plate thickness | 3 mm | 2 – 6 |
| Tilt hub outer diameter | 16 mm | 10 – 24 |
| Tilt hub screw hole diameter | 6 mm | 3 – 10 |
| Tilt hub overlap into tower | 0.5 mm | 0 – 1 |
| Payload shelf width | 30 mm | 15 – 50 |
| Payload shelf depth | 16 mm | 8 – 30 |
| Payload shelf thickness | 3 mm | 2 – 6 |
| Shelf offset below tilt axis | 15 mm | 5 – 25 |
| Payload screw hole diameter | 3.4 mm | 2 – 6 |
| Payload hole inset from shelf edge | 5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
