Brackets and mounts
Servo Tail Frame Assembly
- Bounding box
- 92 × 249 × 20 mm
- Engine
- 3D Printing B-rep
- Parameters
- 33
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
1. Main Torso (Do this in 2 steps) Prompt 1 (The Base Shape): Create a hollow rectangular box, 150mm long, 50mm wide, and 20mm tall, with a 2mm wall thickness. Prompt 2 (The Holes - paste this after the box is generated): Add four 2.2mm holes on the top face, spaced 25mm apart. Add a 10x10mm square hole on the front face. Add two 2mm holes on the left and right sides. Add one 3mm hole on the rear face. ⚙️ 2. Limb Joint (Do this in 2 steps) Prompt 1 (The Servo Mount): Create a U-shaped bracket with a 20mm by 9mm rectangular cutout in the center. Add a flat base measuring 15mm by 15mm with two 1.6mm holes. Prompt 2 (The Arm): Add a 15mm long rectangular arm extending from the right side of the bracket. Add a 2.1mm hole at the far end of the arm. 🪂 3. Tail Mount & Frame (Do this in 2 steps) Prompt 1 (The Mount): Create a solid block 20mm wide, 15mm long, and 10mm tall. Cut a 10mm deep, 8mm wide slot into the back. Prompt 2 (The Frame): Create a flat trapezoid, 100mm long. The front width is 40mm, and the back width is 60mm. Cut out the center leaving a 2mm thick border. Add 1.5mm holes every 10mm around the border.
Parameters
| Name | Value | Range |
|---|---|---|
| Torso length, front-to-back | 150 mm | 60 – 250 |
| Torso width | 50 mm | 20 – 120 |
| Torso height | 20 mm | 10 – 60 |
| Wall thickness | 2 mm | 1.2 – 6 |
| Top hole diameter | 2.2 mm | 1 – 6 |
| Top hole spacing | 25 mm | 10 – 50 |
| Front square hole size | 10 mm | 4 – 30 |
| Side hole diameter | 2 mm | 1 – 6 |
| Rear hole diameter | 3 mm | 1 – 8 |
| Base plate size | 15 mm | 10 – 30 |
| Base plate thickness | 2 mm | 1.2 – 6 |
| Base plate screw hole | 1.6 mm | 1 – 4 |
| Servo cutout width | 9 mm | 5 – 20 |
| Servo cutout length | 20 mm | 10 – 40 |
| Bracket wall thickness | 1.5 mm | 1.2 – 4 |
| Bracket floor thickness | 2 mm | 1.2 – 6 |
| Bracket height | 20 mm | 10 – 40 |
| Arm length | 15 mm | 8 – 40 |
| Arm width | 8 mm | 4 – 20 |
| Arm thickness | 4 mm | 2 – 10 |
| Arm hole diameter | 2.1 mm | 1 – 5 |
| Mount width | 20 mm | 10 – 50 |
| Mount length | 15 mm | 8 – 40 |
| Mount height | 10 mm | 6 – 30 |
| Slot width | 8 mm | 4 – 20 |
| Slot depth | 10 mm | 4 – 30 |
| Frame length | 100 mm | 40 – 200 |
| Frame front width | 40 mm | 20 – 100 |
| Frame back width | 60 mm | 20 – 120 |
| Border width | 2 mm | 1.5 – 8 |
| Frame thickness | 2 mm | 1.2 – 6 |
| Frame hole diameter | 1.5 mm | 1 – 4 |
| Frame hole pitch | 10 mm | 5 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o