Enclosures and housings
Servo Housing with Symmetric Pitch Flanges
- Bounding box
- 140.0 × 61.0 × 49.0 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- August 25, 2026
Download
Free to download and use. See the terms.
The prompt
Make the pitch joint symmetric around the RDS3115MG dual-shaft axis. Keep the servo housing fixed. Replace the long cylindrical output with a compact circular flange/hub directly on the servo shaft, with bolt holes for attaching the forearm. Add a matching compact flange/support on the opposite shaft. Both flanges must be perfectly coaxial with the pitch axis. The forearm flange rotates with the servo; the housing remains fixed. No bearings or separate axle.
Parameters
| Name | Value | Range |
|---|---|---|
| Servo Length | 40 mm | 30 – 60 |
| Servo Width | 20 mm | 15 – 30 |
| Servo Height | 36 mm | 25 – 50 |
| Wall Thickness | 3 mm | 2 – 6 |
| Reinforced Thickness | 5 mm | 3 – 10 |
| Housing Clearance | 1 mm | 0.5 – 3 |
| Mounting Screw Diameter | 3 mm | 2 – 5 |
| Mounting Screw Spacing | 15 mm | 10 – 25 |
| Mounting Plate Thickness | 3 mm | 2 – 6 |
| Shaft Diameter | 5.8 mm | 4 – 8 |
| Shaft Clearance | 0.5 mm | 0.1 – 1 |
| Spline Teeth | 25 | 10 – 40 |
| Forearm Length | 80 mm | 50 – 150 |
| Forearm Width | 20 mm | 10 – 40 |
| Forearm Hub Diameter | 20 mm | 10 – 40 |
| Support Length | 60 mm | 30 – 100 |
| Support Hub Diameter | 20 mm | 10 – 40 |
| Gusset Thickness | 3 mm | 2 – 6 |
| Fillet Radius | 1 mm | 0.5 – 3 |
| Output Hub Diameter | 30 mm | 20 – 50 |
| Output Hub Thickness | 8 mm | 5 – 15 |
| Output Bolt Circle | 20 mm | 10 – 40 |
| Output Bolt Diameter | 3 mm | 2 – 5 |
| Output Bolt Count | 4 | 3 – 8 |
| Support Flange Diameter | 25 mm | 15 – 40 |
| Support Flange Thickness | 8 mm | 5 – 15 |
| Side Plate Thickness | 3 mm | 2 – 6 |
| Side Plate Width | 30 mm | 20 – 50 |
| Side Plate Length | 50 mm | 30 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox