Enclosures and housings
Serviceable Electronics Enclosure
- Bounding box
- 80 × 60 × 27.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 34
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Use millimetres. Build a two-piece, serviceable, FDM-printable enclosure and create simple, editable component envelopes for the electronics so the fit can be checked. Do not invent missing dimensions. Keep every uncertain size or position as a clearly named, adjustable parameter and label it assumed or unverified.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer width X (assumed) | 80 mm | 30 – 200 |
| Outer depth Y (assumed) | 60 mm | 20 – 200 |
| Base height without lid (assumed) | 24 mm | 10 – 80 |
| Lid plate thickness (assumed) | 3.2 mm | 2 – 10 |
| Wall thickness (assumed) | 2.4 mm | 1.2 – 6 |
| Base floor thickness (assumed) | 2.4 mm | 1.2 – 6 |
| Outer vertical corner radius (assumed) | 5 mm | 0 – 15 |
| Lid lip insertion depth (assumed) | 2.5 mm | 1 – 6 |
| Per-side lip clearance (assumed) | 0.25 mm | 0.1 – 0.5 |
| Lid lip wall thickness (assumed) | 1.6 mm | 1 – 4 |
| Gap between screw boss and lid lip (assumed) | 1 mm | 0.5 – 5 |
| M3 clearance hole diameter (assumed) | 3.4 mm | 2.5 – 6 |
| M3 pilot hole diameter (assumed) | 2.5 mm | 2 – 4 |
| Screw boss outer diameter (assumed) | 7 mm | 4 – 12 |
| Screw boss height from cavity floor (assumed) | 18 mm | 5 – 30 |
| Pilot hole depth from boss top (assumed) | 9 mm | 3 – 25 |
| Counterbore diameter (assumed) | 6.2 mm | 4 – 10 |
| Counterbore depth (assumed) | 1.8 mm | 0.6 – 4 |
| PCB envelope width (assumed) | 50 mm | 10 – 150 |
| PCB envelope depth (assumed) | 30 mm | 10 – 150 |
| PCB envelope thickness (assumed) | 1.6 mm | 0.6 – 5 |
| PCB standoff height above cavity floor (assumed) | 5 mm | 2 – 20 |
| PCB envelope X offset (assumed) | 0 mm | -50 – 50 |
| PCB envelope Y offset (assumed) | 0 mm | -50 – 50 |
| PCB standoff diameter (assumed) | 4 mm | 2 – 10 |
| Standoff inset from PCB corners (assumed) | 4 mm | 0 – 20 |
| Show PCB reference envelope (non-printing) | 1 | 0 – 1 |
| Component envelope width (assumed) | 25 mm | 5 – 100 |
| Component envelope depth (assumed) | 20 mm | 5 – 100 |
| Component envelope height (assumed) | 8 mm | 2 – 40 |
| Component envelope X offset (assumed) | 0 mm | -50 – 50 |
| Component envelope Y offset (assumed) | 0 mm | -50 – 50 |
| Component envelope bottom Z (assumed) | 9 mm | 0 – 60 |
| Show component reference envelope (non-printing) | 1 | 0 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,