Enclosures and housings
Sensor Enclosure - Housing + Front Cover (Exploded)
- Bounding box
- 142.0 × 22.0 × 55.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a compact industrial temperature and humidity sensor enclosure for plastic injection molding. Overall dimensions: 65 mm wide, 55 mm high and 25 mm deep. Material: ABS. Nominal wall thickness: 2 mm. Create TWO SEPARATE SOLID COMPONENTS: LOWER HOUSING: Rounded rectangular box. Hollow interior using 2 mm walls. Four internal cylindrical screw bosses (6 mm external diameter, 2.5 mm holes). Four internal reinforcement ribs, 1.2 mm thick. One cable opening (10 x 5 mm). FRONT COVER: Separate removable cover, 65 x 55 mm. Perimeter locating lip, 3 mm high and 1.2 mm thick. Central display opening (25 x 12 mm). Ventilation grille with 8 parallel slots, each 24 x 1.2 mm. INJECTION MOLDING REQUIREMENTS: Draft angles: 1.5 degrees. Uniform wall thickness. Rounded internal and external corners. Avoid unnecessary thick sections and undercuts. Suitable for straight-pull mold opening. Generate two independent watertight solid bodies, correctly fitted together. Export each component as STEP (.step), not STL. Include an exploded isometric view and dimensioned technical drawings if supported.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 65 mm | 40 – 120 |
| Overall Height | 55 mm | 30 – 100 |
| Housing Depth | 22 mm | 10 – 60 |
| Nominal Wall | 2 mm | 1.2 – 4 |
| Corner Radius | 3 mm | 1 – 8 |
| Exploded Layout Gap | 12 mm | 2 – 60 |
| Screw Boss OD | 6 mm | 4 – 12 |
| Screw Boss Hole Dia | 2.5 mm | 1.2 – 5 |
| Screw Boss Height | 16 mm | 5 – 40 |
| Rib Thickness | 1.2 mm | 0.6 – 3 |
| Rib Depth from Back | 10 mm | 2 – 40 |
| Cable Opening Width | 10 mm | 3 – 30 |
| Cable Opening Height | 5 mm | 2 – 20 |
| Cover Thickness | 3 mm | 1.5 – 8 |
| Locating Lip Height | 3 mm | 1 – 10 |
| Locating Lip Thickness | 1.2 mm | 0.6 – 3 |
| Lip Fit Clearance | 0.2 mm | 0.05 – 1 |
| Display Opening Width | 25 mm | 5 – 40 |
| Display Opening Height | 12 mm | 5 – 30 |
| Display Centre Offset | 13.75 mm | -18 – 18 |
| Vent Slot Count | 8 pcs | 1 – 14 |
| Vent Slot Length | 24 mm | 5 – 50 |
| Vent Slot Width | 1.2 mm | 0.6 – 4 |
| Vent Slot Pitch | 2.5 mm | 1.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,