Brackets and mounts
SDVX Controller Top Panel
- Bounding box
- 200 × 150 × 10 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D model (or write OpenSCAD script) for a Sound Voltex (SDVX) controller top panel module. Dimensions: 200mm width, 150mm depth, 10mm thickness rectangular plate with R5mm fillets on 4 corners. Button Cutouts: Four 60mm x 60mm square holes for BT buttons arranged in a 2x2 grid in the center, and two 30mm diameter circular holes below them for FX buttons. Encoder Cutouts: Two 15mm diameter circular holes at the top-left and top-right corners for 600P/R rotary encoders (knobs). Bottom Mounting: On the bottom surface, add four 10.2mm diameter, 3.1mm deep blind holes near the 4 corners for neodymium magnets, and a 15mm x 5mm, 2mm deep rectangular pocket at the bottom-center for a 2.54mm pitch pogo pin target pad.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel width | 200 mm | 100 – 400 |
| Panel depth | 150 mm | 80 – 300 |
| Panel thickness | 10 mm | 3 – 30 |
| Corner fillet radius | 5 mm | 0 – 20 |
| Square BT cutout side | 60 mm | 20 – 80 |
| BT grid spacing in X | 66 mm | 40 – 160 |
| BT grid spacing in Y | 66 mm | 40 – 140 |
| FX hole diameter | 30 mm | 10 – 60 |
| FX hole X offset from centre | 81 mm | 30 – 120 |
| FX hole Y position | -35 mm | -70 – 70 |
| Encoder shaft hole diameter | 15 mm | 6 – 30 |
| Encoder hole X offset from centre | 74 mm | 20 – 110 |
| Encoder hole Y position | 58 mm | 0 – 75 |
| Magnet pocket diameter | 10.2 mm | 4 – 20 |
| Magnet pocket depth | 3.1 mm | 1 – 8 |
| Magnet inset from side edge | 10 mm | 6 – 40 |
| Magnet inset from front/back edge | 13 mm | 6 – 40 |
| Pogo target pad pocket width X | 15 mm | 5 – 40 |
| Pogo target pad pocket depth Y | 5 mm | 3 – 20 |
| Pogo target pad pocket depth | 2 mm | 0.6 – 6 |
| Pogo pocket Y position | -68 mm | -73 – 73 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl