Enclosures and housings
Scooter Front Wheel Module
- Bounding box
- 663.6 × 235.0 × 180.3 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create fabrication-ready TOP, SIDE, and BOTTOM views of the FRONT WHEEL MODULE for a flat 24x10x1" deck (top Y=3", underside Y=2"). Front wheel: 5" hub motor, center at X=2.5", Y=2.5". Wheel passes through deck. Add 5.25" circular deck cutout centered exactly on this wheel center. Cylindrical housing (boss) on deck: center exactly on wheel center (head tube must be directly over wheel). Boss OD 4.5–5", height 1–1.5", fillet 0.5–0.75" into deck. Head tube: 2" OD cylinder, centered on wheel axis, vertical or slight rake, wall 0.125–0.150". Show through-hole for fork shaft and bearings inside housing. Inside housing: add internal support structure (ribs or thickened walls) tying head tube to boss and deck. Show this in section/side view. Fork: shaft through head tube to wheel hub; fork legs connect to hub. Show legs in top and side views. Bottom view: show wheel cavity, boss underside, internal support, radial ribs + longitudinal ribs (2–2.5 mm thick). Label parts: Deck, Wheel, Cutout, Boss, Head Tube, Fork Shaft, Fork Legs, Internal Support, Underside Ribs. Dimension all features.
Parameters
| Name | Value | Range |
|---|---|---|
| Deck Length (in) | 24 in | 20 – 30 |
| Deck Width (in) | 10 in | 6 – 14 |
| Deck Thickness (in) | 1 in | 0.5 – 2 |
| Deck Top Height (in) | 3 in | 2.5 – 4 |
| Cutout Diameter (in) | 5.25 in | 4.5 – 6.5 |
| Cutout X Offset (in) | 2.5 in | 1 – 6 |
| Boss OD (in) | 5 in | 4.5 – 5.5 |
| Boss Height (in) | 1.5 in | 1 – 2 |
| Boss Fillet Radius (in) | 0.6 in | 0.25 – 0.75 |
| Boss Inner Diameter (in) | 2.5 in | 2 – 3 |
| Head Tube OD (in) | 2 in | 1.5 – 2.5 |
| Head Tube Wall (in) | 0.14 in | 0.1 – 0.2 |
| Head Tube Height (in) | 6 in | 4 – 10 |
| Head Tube Angle (deg) | 0 ° | 0 – 10 |
| Fork Shaft Diameter (in) | 0.75 in | 0.5 – 1 |
| Fork Leg Radius (in) | 0.38 in | 0.2 – 0.5 |
| Shaft Bottom Z (in) | 3.5 in | 2.5 – 4.5 |
| Wheel Diameter (in) | 5 in | 3 – 8 |
| Wheel Width (in) | 2 in | 1 – 4 |
| Hub Diameter (in) | 2 in | 1 – 3 |
| Axle Diameter (in) | 0.38 in | 0.25 – 0.5 |
| Rib Thickness (in) | 0.1 in | 0.05 – 0.2 |
| Rib Height (in) | 0.1 in | 0.05 – 0.3 |
| Radial Rib Count | 8 | 0 – 16 |
| Radial Rib Length (in) | 2 in | 1 – 4 |
| Longitudinal Rib Count | 3 | 0 – 8 |
| Internal Rib Count | 4 | 0 – 12 |
| Internal Rib Thickness (in) | 0.1 in | 0.05 – 0.2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no