Mechanical parts
Scissor Lift Table
- Bounding box
- 139.6 × 64 × 90.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Single Scissor Lift with lead screw operated.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate length | 120 mm | 60 – 200 |
| Base plate width | 64 mm | 40 – 120 |
| Base plate thickness | 6 mm | 3 – 12 |
| Platform length | 120 mm | 60 – 200 |
| Platform width | 64 mm | 40 – 120 |
| Platform thickness | 12 mm | 8 – 24 |
| Arm length between pivots | 100 mm | 60 – 160 |
| Arm bar height | 10 mm | 6 – 20 |
| Arm bar thickness | 6 mm | 4 – 12 |
| Scissor opening angle | 45 deg | 25 – 65 |
| Lower pivot height above bed | 14 mm | 10 – 30 |
| Arm offset from centre line | 8 mm | 6 – 16 |
| Lead screw diameter | 8 mm | 5 – 12 |
| Lead screw axis height | 11 mm | 8 – 20 |
| Crank handle length | 52 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
