Enclosures and housings
SC-101 Side Strip
- Bounding box
- 16.0 × 2.0 × 0.8 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
PROJECT: SC-101 SIDE STRIP Revision A UNITS: Inches OBJECT: Create one solid 3D part. OVERALL SIZE: Length = 16.000 Width = 2.000 Thickness = 0.750 BODY: Create a rectangular solid: 16.000 x 2.000 x 0.750 NOTCHES: Match the notch spacing and profile of the locked SC-101 Master Top Strip exactly. Requirements: • Same centerline spacing • Same notch widths • Same notch locations • Mirror the mating geometry where required so the two strips work together. • Maintain a minimum 0.250 in structural web beneath every notch. DRAFT: Apply a 5° draft to all vertical notch faces. FILLET: Inside corners: 0.0625 in radius Outside edges: 0.030 in break/chamfer BLOCK SEATING: Increase notch depth so the concrete block seats farther into the strip than the previous revision while preserving the existing interlock geometry. OBJECTIVES: • Self-centering • Self-leveling • Self-squaring • Rigid engagement • No undercuts • Mold-release friendly FASTENING: Provide countersunk #8 screw holes near both ends. Center holes across the 2.000 in width. Locate approximately 0.75 in from each end. Countersink for flat-head wood screws. PRINT: PETG 0.20 mm layer height 5 perimeters 40–50% gyroid infill No supports Print flat on the 16 x 2 face. OUTPUT: Single watertight solid suitable for STL export.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 16 in | 4 – 48 |
| Width | 2 in | 0.5 – 8 |
| Thickness | 0.75 in | 0.25 – 3 |
| Notch Count | 5 | 1 – 20 |
| Notch Spacing | 2.5 in | 0.5 – 10 |
| Notch Width | 0.75 in | 0.125 – 4 |
| Notch Depth | 0.5 in | 0.0625 – 1.5 |
| Draft Angle | 5 deg | 0 – 10 |
| Inside Corner Fillet | 0.06 in | 0 – 0.5 |
| Outside Edge Chamfer | 0.03 in | 0 – 0.25 |
| Hole Offset from End | 0.75 in | 0.25 – 4 |
| Screw Clearance Hole Diameter | 0.2 in | 0.0625 – 0.5 |
| Countersink Diameter | 0.38 in | 0.125 – 0.75 |
| Countersink Angle | 82 deg | 60 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox