Enclosures and housings
Samsung Galaxy S26 Ultra Protective Case with Hebrew Psalm 100
- Bounding box
- 33.4 × 48.0 × 0.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 38
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a real, editable, parametric 3D CAD model of a protective back phone case for the Samsung Galaxy S26 Ultra. IMPORTANT: This must be actual solid CAD geometry, NOT a picture, render, or decorative concept. NOMINAL PHONE DIMENSIONS: - Height: 163.6 mm - Width: 78.1 mm - Thickness: 7.9 mm DESIGN: 1. Create a minimalist, elegant protective case. 2. Back plate thickness: 1.6 mm. 3. Side walls: approximately 1.7 mm thick. 4. Rounded corners. 5. Add a small protective lip around the front edge. 6. Include accessible side-button openings. 7. Include a large camera clearance opening at the upper rear corner, with a separate flash clearance if dimensions are known. 8. Leave the USB-C port, speaker, microphone and S Pen accessible. 9. Add the complete Hebrew Psalm 100 (Mizmor LeTodah) as raised 3D text in the center of the back. 10. Hebrew must be correctly shaped and displayed RIGHT TO LEFT. Do not mirror or reverse the letters. 11. Raised text height: 0.6 mm. 12. Use a clear, readable Hebrew font with sufficiently thick strokes for FDM 3D printing. EXACT HEBREW TEXT: מִזְמוֹר לְתוֹדָה הָרִיעוּ לַיהוָה כָּל הָאָרֶץ׃ עִבְדוּ אֶת יְהוָה בְּשִׂמְחָה, בֹּאוּ לְפָנָיו בִּרְנָנָה׃ דְּעוּ כִּי יְהוָה הוּא אֱלֹהִים, הוּא עָשָׂנוּ וְלוֹ אֲנַחְנוּ, עַמּוֹ וְצֹאן מַרְעִיתוֹ׃ בֹּאוּ שְׁעָרָיו בְּתוֹדָה, חֲצֵרֹתָיו בִּתְהִלָּה, הוֹדוּ לוֹ בָּרְכוּ שְׁמוֹ׃ כִּי טוֹב יְהוָה, לְעוֹלָם חַסְדּוֹ וְעַד דֹּר וָדֹר אֱמוּנָתוֹ׃ OUTPUT: - Export a real, solid, printable STL file. - Units must be millimeters. - Ensure the mesh is watertight and has no non-manifold geometry. - Make all raised Hebrew letters physically connected to the back plate. - Preserve the exact overall dimensions. - Make the model editable before export. IMPORTANT LIMITATION: Camera and button locations have not been measured. Do not invent precision. Mark these openings as provisional and make their positions and dimensions editable.
Parameters
| Name | Value | Range |
|---|---|---|
| Phone width | 78.1 mm | 20 – 200 |
| Phone height | 163.6 mm | 20 – 250 |
| Phone thickness | 7.9 mm | 1 – 30 |
| Back plate thickness | 1.6 mm | 0.6 – 6 |
| Side wall thickness | 1.7 mm | 0.8 – 6 |
| Clearance per side | 0.25 mm | 0.05 – 1 |
| Outer corner radius | 12 mm | 2 – 30 |
| Front lip overhang | 0.8 mm | 0 – 3 |
| Front lip height | 0.9 mm | 0.2 – 3 |
| Raised text height | 0.6 mm | 0.2 – 2 |
| Camera opening center X | -20 mm | -40 – 40 |
| Camera opening center Y | 60 mm | 10 – 85 |
| Camera opening width | 32 mm | 5 – 60 |
| Camera opening height | 34 mm | 5 – 60 |
| Camera opening corner radius | 4 mm | 0 – 10 |
| Flash opening center X | -20 mm | -40 – 40 |
| Flash opening center Y | 38 mm | 10 – 85 |
| Flash opening diameter | 8 mm | 2 – 20 |
| Volume button center Y | 35 mm | -80 – 80 |
| Volume button length | 16 mm | 5 – 30 |
| Volume button center Z | 4.9 mm | 0 – 10 |
| Volume button height | 4 mm | 1 – 10 |
| Power button center Y | 10 mm | -80 – 80 |
| Power button length | 20 mm | 5 – 30 |
| Power button center Z | 4.9 mm | 0 – 10 |
| Power button height | 4 mm | 1 – 10 |
| USB-C opening center X | 0 mm | -30 – 30 |
| USB-C opening width | 10 mm | 4 – 20 |
| USB-C opening height | 3.6 mm | 2 – 8 |
| Speaker opening center X | 16 mm | -30 – 30 |
| Speaker opening width | 6 mm | 1 – 15 |
| Speaker opening height | 2.5 mm | 1 – 6 |
| Microphone opening center X | -16 mm | -30 – 30 |
| Microphone opening diameter | 2.5 mm | 1 – 6 |
| S Pen opening center X | -30 mm | -40 – 40 |
| S Pen opening width | 6 mm | 2 – 15 |
| S Pen opening height | 3 mm | 1 – 8 |
| Bottom port center Z | 4.9 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,