Enclosures and housings
Salt Lamp Pedestal Ø136 x 20
- Bounding box
- 136.4 × 136.4 × 20.2 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing 3D model into a professional, round, low-profile pedestal for a 2 kg Himalayan salt lamp. Requirements: - Overall height: 20 mm. - Bottom outer diameter: 136 mm. - Top outer diameter: 122 mm. - Smooth, elegant, curved exterior, wider at the bottom. - Flat, solid upper surface to support the lamp. - Hollow interior, with no permanent ribs or cross-bracing. - Bottom circular recess: 117 mm diameter and 1.8 mm deep, for a removable cover. - Interior cavity approximately 110 mm diameter and 11 mm deep. - On the inside of the side wall, create one symmetrical rectangular recess with rounded corners for a small LED switch. - Center a 1 mm diameter through-hole exactly in the middle of this recess, pointing radially through the outer wall. - The remaining wall thickness at the center of the switch recess must be 1 mm. - Preserve the outer curved profile around the switch area. - Design for PETG 3D printing with a 0.4 mm nozzle. - Ensure the model is a closed, watertight solid suitable for STL export. - Do not add supports as part of the model. Generate an accurate parametric CAD model with all dimensions in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Bottom outer diameter | 136 mm | 80 – 220 |
| Overall height | 20 mm | 10 – 60 |
| Top flat diameter | 122 mm | 60 – 210 |
| Bottom edge fillet | 1.5 mm | 0 – 5 |
| Cover recess diameter | 117 mm | 50 – 200 |
| Cover recess depth | 1.8 mm | 0.5 – 5 |
| Interior cavity diameter | 110 mm | 40 – 195 |
| Interior cavity depth | 11 mm | 2 – 45 |
| Switch recess width | 16 mm | 5 – 40 |
| Switch recess height | 10 mm | 4 – 20 |
| Recess corner radius | 3 mm | 0.5 – 6 |
| Recess centre height Z | 7.3 mm | 1 – 25 |
| Remaining wall at recess | 1 mm | 0.6 – 4 |
| Light-pipe hole diameter | 1 mm | 0.4 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no