Enclosures and housings
S-Curve Ribbed Bench
- Bounding box
- 4500 × 899 × 449.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create an editable 3D CAD model of the attached reference bench. Design a contemporary sculptural bench with a smooth organic S-shaped form, two wide rounded seating areas, and a narrow flowing middle section. Dimensions: approximately 4500 × 900 × 450 mm. Use millimeters. Create a structure of individually editable parallel wooden ribs following the entire curved shape. Use 20–30 mm thick light oak ribs with evenly spaced gaps, smooth rounded edges, and consistent geometry. Add two separate soft, elongated, rounded white or ivory cushions integrated into the wooden structure. Use smooth NURBS or solid CAD geometry, not a static mesh or simple render. Make the main curve, dimensions, rib thickness, spacing, and number of ribs adjustable wherever possible. Preserve the reference image’s organic S-shaped design and sculptural appearance. Avoid sharp corners or simplifying the bench into a straight rectangular form. Create a clean, accurate, editable CAD model suitable for further modification in Rhino 3D.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 4500 mm | 1500 – 6000 |
| Overall height incl. cushion | 450 mm | 300 – 700 |
| Length of each seating lobe | 1400 mm | 400 – 2000 |
| How far the middle top sags | 155 mm | 0 – 250 |
| How far the middle underside lifts | 100 mm | 0 – 200 |
| Rounding radius of the bench ends | 60 mm | 10 – 150 |
| Number of parallel wooden ribs | 24 mm | 8 – 40 |
| Rib thickness | 25 mm | 8 – 40 |
| Even gap between ribs | 13 mm | 3 – 40 |
| Cushion length | 1300 mm | 400 – 2400 |
| Cushion width | 650 mm | 200 – 880 |
| Cushion thickness | 120 mm | 40 – 250 |
| Cushion edge softness | 50 mm | 5 – 60 |
| Cushion sunk into the ribs | 20 mm | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,