Enclosures and housings
Rugged 2-Piece Enclosure (Base + Lid)
- Bounding box
- 59.0 × 36.0 × 17.5 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 1, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 2-piece rugged electronic enclosure for a board. Inner dimensions: 53mm length, 30mm width, 10mm total height. Wall thickness: 3mm. External design must be tactical with rugged/chunky reinforced corners. Add 4 through-holes for M3 screws on the corners. Add a rectangular cutout for a USB port on the short side center."
Parameters
| Name | Value | Range |
|---|---|---|
| Internal Length | 53 mm | 20 – 120 |
| Internal Width | 30 mm | 20 – 120 |
| Internal Height | 10 mm | 5 – 40 |
| Wall Thickness | 3 mm | 1.5 – 6 |
| Base Floor Thickness | 3 mm | 1.5 – 6 |
| Corner Pillar Size | 8 mm | 4 – 16 |
| Corner Recess Depth | 2 mm | 0 – 5 |
| Screw Through-Hole Dia | 3.4 mm | 2 – 6 |
| Hole Inset From Outer Edge | 4.5 mm | 3 – 12 |
| USB Cutout Width | 10 mm | 4 – 25 |
| USB Cutout Height | 5 mm | 2 – 15 |
| USB Cutout Centre Height | 6.5 mm | 3 – 15 |
| Lid Plate Thickness | 3 mm | 1.5 – 10 |
| Lid Corner Boss Size | 8 mm | 4 – 16 |
| Stiffening Rib Count | 4 mm | 0 – 8 |
| Rib Width | 3 mm | 1 – 10 |
| Rib Height | 1.5 mm | 0.5 – 6 |
| Edge Chamfer | 1 mm | 0 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no