Enclosures and housings
Ruger RXM Magwell
- Bounding box
- 51.0 × 61.0 × 31.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Prompt:Generate a highly precise, functional 3D printable mechanical magwell (magazine funnel) designed specifically for the Ruger RXM 9mm pistol equipped with the factory Magpul Enhanced Handgun Grip (EHG).Technical Specifications & Dimensions to match:Base Firearm: Ruger RXM (9x19mm), featuring the Magpul EHG grip framework.Slide/Frame Width: 1.00 inch (25.4 mm).Width at Magwell Junction: 1.30 inches (33.02 mm) maximum outer width constraint.Magazine Compatibility: Must perfectly clear and accept Magpul PMAG 15 GL9 and standard Glock 19 Gen 3 magazines without interference.Design Requirements:Style: Low-profile, ergonomic, competition/EDC style flared magwell.Fitment: Snug, press-fit over the bottom lip of the Magpul EHG grip. It must include a rear attachment point (retaining screw channel) aligning with the grip's backstrap cavity or lanyard hole for a secure set-screw installation.Geometry: Smoothly blended inner bevel (funnel) with a 20 to 30-degree angling to guide fast magazine insertions. The front portion should feature an ergonomic pinky-rest undercut.Output: Clean, manifold 3D geometry ready for CAD refinement and FDM/SLS 3D printing (STL/STEP format alignment).
Parameters
| Name | Value | Range |
|---|---|---|
| Grip Outer Width (X) | 28 mm | 20 – 35 |
| Grip Outer Length (Y) | 48 mm | 40 – 60 |
| Magwell Opening Width (X) | 19 mm | 15 – 25 |
| Magwell Opening Length (Y) | 29 mm | 20 – 35 |
| Press-fit Clearance | 0.2 mm | 0 – 1 |
| Grip Sleeve Height | 10 mm | 5 – 20 |
| Total Magwell Height | 25 mm | 10 – 50 |
| Wall Thickness | 3 mm | 1 – 10 |
| Flare Angle (deg) | 25 deg | 5 – 45 |
| Bottom Outer Width (X) | 45 mm | 30 – 60 |
| Bottom Outer Length (Y) | 55 mm | 40 – 70 |
| Top Outer Width (X) at Junction | 33.02 mm | 30 – 40 |
| Top Outer Length (Y) at Junction | 53 mm | 45 – 70 |
| Pinky Cut Height from Bottom | 8 mm | 3 – 15 |
| Pinky Cut Depth | 5 mm | 2 – 10 |
| Screw Hole Offset from Top | 10 mm | 5 – 20 |
| Screw Hole Diameter | 4 mm | 2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no