Enclosures and housings
Rounded Robot Torso Chassis with Top Lid
- Bounding box
- 55.0 × 45.0 × 66.5 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rounded hollow robot torso chassis, 65 mm high, 55 mm wide, and 45 mm deep, with 2.5 mm wall thickness and an openable top lid. On the left side wall, create a rectangular cutout pocket measuring 23.2 mm by 12.5 mm to friction-fit a 9g servo horizontally for the left arm. On the right side wall, create an identical matching 23.2 mm by 12.5 mm servo pocket for the right arm. On the top center cap, create a 5 mm circular hole to pass the top neck servo shaft through. Add a 5 mm hole near the bottom back wall for power cable routing.
Parameters
| Name | Value | Range |
|---|---|---|
| Torso Width (X) | 55 mm | 30 – 120 |
| Torso Depth (Y) | 45 mm | 25 – 120 |
| Torso Height (Z) | 65 mm | 30 – 200 |
| Wall Thickness | 2.5 mm | 1.2 – 5 |
| Floor Thickness | 2.5 mm | 1.2 – 5 |
| Outer Corner Radius | 6 mm | 1 – 12 |
| Servo Pocket Length (Y) | 23.2 mm | 10 – 40 |
| Servo Pocket Height (Z) | 12.5 mm | 6 – 30 |
| Servo Pocket Height From Base | 38 mm | 10 – 100 |
| Cable Hole Diameter | 5 mm | 2 – 12 |
| Cable Hole Height From Base | 8 mm | 4 – 40 |
| Lid Thickness | 2.5 mm | 1.2 – 6 |
| Neck Shaft Hole Diameter | 5 mm | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no