Enclosures and housings
Rounded Leaf-Engraved Vase
- Bounding box
- 260 × 260 × 280 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a complete 3D-printable vase using OpenSCAD. IMPORTANT OUTPUT FORMAT: Return exactly ONE fenced code block marked openscad. The code block must contain the complete executable OpenSCAD script. Do not return JSON, explanations, Markdown text or multiple code blocks. MODEL SPECIFICATION: Vase dimensions: * Total height: 280 mm * Maximum body diameter: 260 mm * Neck outer diameter: 100 mm * Neck height: 30 mm * Wall thickness: 2 mm * Bottom thickness: 3 mm Shape: * Symmetrical, rounded, nearly spherical body. * Maximum diameter at the middle. * Slightly flattened bottom. * Broad rounded shoulders tapering smoothly into a short cylindrical neck. * Open top and hollow interior. * Smooth continuous rotationally symmetrical profile. * Do not create a pear-shaped or elongated vase. Decoration: * Repeating pattern of identical pointed teardrop-shaped leaves. * Each leaf approximately 20 mm high and 10 mm wide. * Vertical orientation. * Regular diagonal staggered arrangement around the entire body. * Shallow engraved closed outlines. * Groove width 0.55 mm. * Groove depth 0.2 mm. * No holes or raised elements. * Leave neck and bottom undecorated. Technical requirements: * Use OpenSCAD rotate_extrude() for the vase body. * Generate the hollow interior with a correctly offset inner profile. * Create the engraved leaf outlines as shallow recessed geometry following the curved outer surface. * Maintain at least 2 mm nominal wall thickness before engraving. * Use modular, editable parameters. * Ensure the final model is a valid watertight printable solid. * Use sufficient mesh resolution for smooth curves. Return only the complete OpenSCAD script inside one openscad code fence.
Parameters
| Name | Value | Range |
|---|---|---|
| Total height | 280 mm | 100 – 400 |
| Maximum body diameter | 260 mm | 100 – 400 |
| Bottom diameter | 180 mm | 60 – 260 |
| Neck outer diameter | 100 mm | 40 – 200 |
| Neck height | 30 mm | 10 – 100 |
| Wall thickness | 2 mm | 1 – 6 |
| Bottom thickness | 3 mm | 1 – 10 |
| Leaf height | 20 mm | 10 – 40 |
| Leaf width | 10 mm | 5 – 30 |
| Groove width | 0.55 mm | 0.3 – 1.5 |
| Groove depth | 0.2 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,