Enclosures and housings
Rounded Base Slab with Foot Pads
- Bounding box
- 480 × 420 × 120 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create one solid, units mm. Origin at the centre of the base footprint on the floor, Z up. Base: rounded slab 480 (X) x 420 (Y) x 110 (Z). Vertical corners R12, top edges R6. Four foot pads 40x40x10, inset 40 mm from each side of the base.
Parameters
| Name | Value | Range |
|---|---|---|
| Base width, X | 480 mm | 100 – 1000 |
| Base depth, Y | 420 mm | 100 – 1000 |
| Slab height, Z | 110 mm | 10 – 400 |
| Vertical corner radius | 12 mm | 2 – 60 |
| Top edge fillet radius | 6 mm | 1 – 40 |
| Foot pad square size | 40 mm | 10 – 120 |
| Foot pad height | 10 mm | 2 – 60 |
| Inset of pad edge from base side | 40 mm | 0 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,