Enclosures and housings
Round Cap with Side Lugs
- Bounding box
- 32.6 × 25.6 × 8.5 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 23, 2026
Download
Free to download and use. See the terms.
The prompt
A round cylindrical wearable device cap with an outer diameter of 25.6mm and a total height of 8.5mm. The top outer edge has a smooth fillet radius of 2.5mm. The inside is hollowed out from the bottom with a 1.0mm uniform wall thickness and a 1.0mm thick top roof. In the center of the inner top ceiling, add a small solid cylinder protrusion with a diameter of 3.5mm and height of 0.7mm to act as a button actuator. On two opposite outer sides of the cylinder, add two rounded loop lugs protruding 3.5mm outwards with 2.5mm through-holes for a wristband cord.
Parameters
| Name | Value | Range |
|---|---|---|
| Cap Outer Diameter | 25.6 mm | 12 – 50 |
| Total Height | 8.5 mm | 3 – 30 |
| Wall Thickness | 1 mm | 0.5 – 3 |
| Roof Thickness | 1 mm | 0.5 – 3 |
| Top Outer Fillet Radius | 2.5 mm | 0.1 – 5 |
| Button Actuator Diameter | 3.5 mm | 1 – 10 |
| Button Actuator Height | 0.7 mm | 0.2 – 3 |
| Lug Protrusion | 3.5 mm | 1 – 8 |
| Lug Through-Hole Diameter | 2.5 mm | 0.8 – 5 |
| Lug Width (Axial Length) | 6 mm | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w