Brackets and mounts
Rotating Waste Sorting Chute
- Bounding box
- 223.8 × 71 × 84.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a functional, single-piece, 3D-printable rotating waste sorting chute for a smart recycling bin. Design a straight, open-top U-shaped channel, 180 mm long, 65 mm internal width, with a 4 mm thick base and two 20 mm high side walls (3 mm thick). The channel must slope downward at 20 degrees for gravity-fed waste movement. Add a reinforced circular mounting hub underneath the upper inlet: 30 mm diameter, 6 mm thick, with a vertical rotation axis and four 3.2 mm mounting holes on a 22 mm bolt circle. The hub must have a horizontal mounting face despite the inclined chute. The entire chute must rotate horizontally to direct waste toward three positions: -30°, 0°, and +30°. Add smooth internal surfaces, rounded edges, and an unobstructed outlet. Generate only the chute and its integrated mounting hub, without motors or containers. Use millimeters, solid watertight geometry, and PLA-compatible 3D printing design.\
Parameters
| Name | Value | Range |
|---|---|---|
| Chute length | 180 mm | 100 – 300 |
| Internal channel width | 65 mm | 30 – 120 |
| Base thickness | 4 mm | 2 – 8 |
| Side wall height | 20 mm | 10 – 40 |
| Side wall thickness | 3 mm | 1.2 – 6 |
| Downward slope | 20 deg | 5 – 45 |
| Hub diameter | 30 mm | 20 – 50 |
| Hub thickness | 6 mm | 4 – 12 |
| Mounting bolt circle diameter | 22 mm | 10 – 35 |
| Mounting hole diameter | 3.2 mm | 2.5 – 5 |
| Bolt hole phase | 45 deg | 0 – 90 |
| Side rotation indicator angle | 30 deg | 10 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
