Enclosures and housings
Rocket Fin Sets (Small, Medium, Large)
- Bounding box
- 617.5 × 250.5 × 140.7 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create 3 sets of fins (a small, a medium, and a large set) with each set consisting of four fins and an adapter that will slide onto the bottom of the rocket the diameter and height of the bottom of the rocket are both 20.5 mm. for the small fin set: 100 mm root chord, 50 mm tip chord, 80 mm span (height), 600 mm area. For the medium fin set: 122 mm root chord, 61 mm tip chord, 98 mm span (height), 900 mm area. For the large fin set: 141 root chord, 71 mm tip chord, 113 mm span (height), 1200 mm area.
Parameters
| Name | Value | Range |
|---|---|---|
| Rocket Base Diameter | 20.5 mm | 10 – 50 |
| Sleeve Length | 20.5 mm | 10 – 60 |
| Sleeve Wall Thickness | 2 mm | 1 – 5 |
| Fin Thickness | 3 mm | 1 – 6 |
| Small Fin Root Chord | 100 mm | 50 – 200 |
| Small Fin Tip Chord | 50 mm | 20 – 100 |
| Small Fin Span | 80 mm | 30 – 150 |
| Medium Fin Root Chord | 122 mm | 50 – 250 |
| Medium Fin Tip Chord | 61 mm | 20 – 120 |
| Medium Fin Span | 98 mm | 30 – 180 |
| Large Fin Root Chord | 141 mm | 50 – 300 |
| Large Fin Tip Chord | 71 mm | 20 – 150 |
| Large Fin Span | 113 mm | 30 – 220 |
| Layout Gap | 200 mm | 100 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,