3D preview of Robotic Gripper Claw with TPU Pad
Loading the interactive model…
Interactive 3D model of Robotic Gripper Claw with TPU Pad

Brackets and mounts

Robotic Gripper Claw with TPU Pad

1 views
Bounding box
71.0 × 33.0 × 32.0 mm
Engine
Precision B-rep
Parameters
18
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Create a new, fully 3D-printable robotic gripper claw for a two-finger electromagnetic gripper. **Design requirements:** - Design one curved claw that can be mirrored to create the opposite claw. - Use a compact C-shaped geometry with smooth curves and reinforced sections. - Optimize the geometry to minimize bending stress and maximize gripping force. - Make the claw suitable for picking up small electronic components, including resistors, screws, capacitors, and relays. - Incorporate a narrow, slightly tapered fingertip with a flat inward-facing gripping surface. - Include a mounting surface for a removable 3 mm thick TPU gripping pad with shallow grooves. - Use generous fillets around curved transitions and pivot regions to prevent cracking. - Reinforce the pivot area with additional material without making the entire claw unnecessarily thick. - Include a pivot hole and linkage connection features for attachment to an existing mechanical gripper. - Design the claw so the gripping tips face each other when two mirrored claws are installed. - Ensure the claw can open sufficiently for larger components while still closing enough to grip small resistors. - Maintain adequate clearance between the claw arms and the central actuator. - Keep the geometry suitable for FDM printing using ABS or another rigid engineering filament. **Mechanical design priorities:** 1. High gripping force at the fingertips. 2. Low weight to reduce load on the electromagnetic actuator. 3. High strength around the pivot and linkage connections. 4. Smooth, reliable rotation. 5. Replaceable TPU fingertip pads. Do not add decorative details or unnecessary mechanical complexity. Generate a solid CAD model suitable for export as STEP and STL.

Parameters

NameValueRange
Reach58 mm30 – 100
Body Height32 mm10 – 60
Arm Thickness (Plan)14 mm6 – 25
Rear Tab Length13 mm4 – 30
Vertical Fillet Radius2 mm0 – 4
Pivot Y Position18 mm4 – 40
Pivot Boss Diameter12 mm6 – 24
Pivot Hole Diameter5 mm1 – 10
Clevis Slot Width6 mm2 – 12
Clevis Slot Depth6 mm2 – 20
Fingertip Length16 mm6 – 40
Fingertip Thickness (Y)10 mm4 – 20
Pad Width (X)8 mm2 – 20
Pad Length (Z)18 mm4 – 40
Pad Thickness3 mm1 – 8
Groove Count30 – 8
Groove Width0.8 mm0.2 – 2
Groove Depth0.6 mm0.1 – 1.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Robotic Gripper Claw with TPU Pad - Free CAD Model (STEP, STL) | TextoCAD