Brackets and mounts
Robotic Arm Base Pedestal
- Bounding box
- 291.0 × 264.3 × 217 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a robotic arm base pedestal in millimeters. Start with a flat hexagonal/three-eared base plate centered at the origin, 271.5 mm wide across the flat-to-point span and 28 mm thick, with three symmetrical mounting ears spaced 120 degrees apart. Drill two 15 mm diameter through-holes into each of the three mounting ears (6 holes total) near the outer edges. Extrude a hollow vertical cylindrical column upward from the center of the base plate to a total part height of 217 mm, with an outer diameter of 208 mm and an inner bore diameter of 180 mm. Add a 5 mm fillet where the vertical cylinder meets the top face of the base plate.
Parameters
| Name | Value | Range |
|---|---|---|
| Flat-to-point span | 271.5 mm | 150 – 400 |
| Plate thickness | 28 mm | 5 – 60 |
| Mounting ear lobe radius | 46 mm | 25 – 80 |
| Mounting hole diameter | 15 mm | 5 – 25 |
| Hole-pair radial distance | 118 mm | 60 – 160 |
| Half spacing of hole pair | 22 mm | 8 – 40 |
| Overall pedestal height | 217 mm | 80 – 400 |
| Column outer diameter | 208 mm | 60 – 320 |
| Column inner bore diameter | 180 mm | 30 – 300 |
| Column-to-plate fillet radius | 5 mm | 0 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
