Mechanical parts
Robot Arm and Hand
- Bounding box
- 78.5 × 72 × 216.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
mechanical robot arm and hand
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 72 mm | 40 – 140 |
| Base height | 14 mm | 6 – 40 |
| Turret diameter | 46 mm | 24 – 90 |
| Turret height | 30 mm | 12 – 60 |
| Link width / thickness | 16 mm | 10 – 30 |
| Lower arm length | 70 mm | 30 – 160 |
| Upper arm length | 55 mm | 25 – 140 |
| Lower arm lean | 25 deg | 0 – 70 |
| Upper arm lean | -20 deg | -60 – 60 |
| Palm width | 36 mm | 20 – 80 |
| Palm depth | 30 mm | 16 – 70 |
| Palm thickness | 14 mm | 6 – 30 |
| Finger length | 32 mm | 15 – 70 |
| Finger thickness | 10 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
