Enclosures and housings
RO Filter with Internal Candle and Sensors
- Bounding box
- 72 × 116 × 276.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 31
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
See the earlier you give me cad model that was a good enough but it was just outer covering about the whole in a like the candle that is present in the filter then everything the sensors that I have mentioned earlier in the image everything I want like everything it should be in the model
Parameters
| Name | Value | Range |
|---|---|---|
| Outer housing diameter | 68 mm | 40 – 100 |
| Housing body height | 180 mm | 80 – 300 |
| Housing wall thickness | 3 mm | 1.5 – 5 |
| Bottom edge chamfer | 3 mm | 1 – 10 |
| Cap visible height above housing | 48 mm | 30 – 80 |
| Cap to housing press-fit overlap | 8 mm | 4 – 15 |
| Cap lid thickness | 3 mm | 1.5 – 5 |
| Cap rim flare per side | 2 mm | 0 – 5 |
| Push-fit port OD | 12.7 mm | 8 – 20 |
| Port bore | 8 mm | 4 – 12 |
| Port protrusion | 22 mm | 10 – 40 |
| Sensor boss OD | 16 mm | 10 – 25 |
| Sensor boss height | 16 mm | 8 – 30 |
| Sensor bore | 10 mm | 4 – 18 |
| Candle pleat OD | 58 mm | 30 – 80 |
| Central permeate tube OD | 22 mm | 10 – 40 |
| Central permeate bore | 12 mm | 4 – 30 |
| Candle overall height | 166 mm | 40 – 280 |
| Pleat flute depth | 2.5 mm | 0 – 6 |
| End cap height | 5 mm | 2 – 12 |
| Number of pleats (count) | 24 mm | 8 – 48 |
| TDS probe shaft OD | 9.7 mm | 6 – 18 |
| TDS probe total length | 34 mm | 15 – 60 |
| Exposed length above boss | 14 mm | 5 – 30 |
| Hex gland height | 7 mm | 3 – 15 |
| Pressure probe shaft OD | 9.7 mm | 6 – 18 |
| Pressure probe total length | 28 mm | 12 – 50 |
| Exposed length above boss | 12 mm | 4 – 25 |
| Flow probe shaft OD | 9.7 mm | 6 – 18 |
| Flow probe total length | 30 mm | 12 – 50 |
| Exposed length above boss | 16 mm | 4 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no