Enclosures and housings
Ring & V Logo Medallion
- Bounding box
- 80.0 × 79.6 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create an editable, dimensionally accurate 3D model of the uploaded logo, as a flat extruded solid ready for 3D printing. Reproduce the logo faithfully from the reference image, preserving its proportions, line thicknesses and gaps. Do not simplify or reinterpret it. Logo structure (white shapes in the image = solid geometry) Outer ring: a circular band of constant thickness, centred on the logo, interrupted by three gaps: one at the top centre (vertical gap), one at the lower left and one at the lower right (both just below the horizontal midline). The two lower gaps are symmetrical. The bottom arc of the ring is continuous. Central symbol: two diagonal strokes forming a downward-pointing “V”, meeting at a point near the bottom of the ring and joining its lower arc. A horizontal bar crosses the top of the V and merges into the ring, with a small gap on each side of the V strokes. Inner triangle: a smaller inverted triangular opening formed by the V strokes and a horizontal crossbar at about the vertical centre of the logo. It must stay open (empty), not filled. The black background of the reference image is empty space, not geometry. 3D specifications Extrude all white shapes to a uniform thickness of 3 mm (adjustable parameter) on a single flat plane. Overall logo diameter: 80 mm (adjustable parameter). Keep all proportions locked to the reference image. Keep sharp corners where the original has them; use no fillets or chamfers unless specified. Make sure all shapes are connected and the geometry is watertight, manifold and free of self-intersections. All dimensions in millimetres, with diameter and thickness as editable parameters. Deliverables Editable 3D CAD model (not a render), an STL file ready for slicing and, if possible, a STEP file. A 3D preview to inspect the geometry from the front and at an angle. Confirm that the shape matches the reference, including the three ring gaps and the open inner triangle.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Diameter | 80 mm | 40 – 200 |
| Extrusion Thickness | 3 mm | 1 – 12 |
| Ring Band Width | 8 mm | 3 – 15 |
| Top Gap Width | 10 mm | 2 – 30 |
| Lower Gap Width | 10 mm | 2 – 30 |
| Lower Gap Angle Below Midline | 20 deg | 10 – 45 |
| Crossbar Thickness | 7 mm | 3 – 14 |
| Gap Between Bar and V Strokes | 1.2 mm | 0.5 – 4 |
| V Stroke Width | 7 mm | 3 – 14 |
| V Stroke Half-Angle | 38 deg | 20 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no