Enclosures and housings
Riftbound Empowered Token
- Bounding box
- 59 × 10 × 2.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 4
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create ONE 3D-printable Riftbound TCG "EMPOWERED" status token. **Overall dimensions:** - Length: 59 mm - Width: 10 mm - Total height: 2.4 mm - Horizontal rectangular design with slightly rounded corners. - All dimensions must be exact. **Visual design:** Create a premium-looking rectangular game marker inspired by a futuristic sci-fi nameplate. 1. BODY: - Solid black rectangular base. - Slightly stepped outer silhouette, with small geometric notches near the four corners. - Rounded outer corners, but retain a predominantly rectangular shape. 2. CENTER PANEL: - Flat, recessed-looking black center panel. - Keep the center surface completely flat. 3. BORDER: - Create a thin white geometric double-line border around the center panel. - The border should have decorative interrupted corners, similar to a futuristic electronic nameplate. - Use angular corner accents rather than simple rounded outlines. - The border must be raised above the black surface. 4. TEXT: - Exact spelling: "EMPOWERED" - All uppercase. - Bold, clean, sans-serif font. - Centered horizontally and vertically. - White raised lettering. - Letters must be thick enough to print reliably with a 0.4 mm FDM nozzle. - Ensure all letters are connected to the underlying model or otherwise form printable geometry. **3D PRINTING REQUIREMENTS:** This will be printed on a Bambu Lab P1S using a 0.4 mm nozzle and PLA filament. Design the model for a single manual filament change: - Black geometry: 2.0 mm height. - White border and lettering: 0.4 mm height, beginning at Z=2.0 mm. - Both white elements must start at precisely the same Z height. - No separate white elements floating above the model. - No supports. - Flat bottom. - Watertight, manifold geometry. - No overhangs that require supports. **IMPORTANT:** The final model must be an actual editable 3D solid, not a picture or decorative rendering. Preserve the exact spelling and dimensions. Export a single STL file for one token.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 59 mm | 40 – 100 |
| Width | 10 mm | 5 – 20 |
| Black base height | 2 mm | 1 – 6 |
| White raised height | 0.4 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,