Riduttore 16:1 Rev G - TextoCAD parte 2 di 2

1 views

Bounding box: 112 × 112 × 56.0 mm
Engine: 3D Printing B-rep
Parameters: 10
Published: November 12, 2026

Download

Free to download and use. See the terms.

The prompt

Parte 2/2 del modello Rev G importato in TextoCAD: satelliti 2, innesto ghiera, contatore 0-15, spine centraggio, fermaboccola. Completa il progetto 1/2 con tutte le 33 parti, senza perni metallici.

Parameters

Name	Value	Range
Diametro esterno mm	112 mm	108 – 120
Modulo denti mm	1.5 mm	1.4 – 1.6
Gioco tangenziale denti mm	0.3 mm	0.18 – 0.42
Foro satellite mm	6.4 mm	6.2 – 6.7
Diametro boccola PETG mm	6 mm	5.8 – 6.2
Foro passante M3 mm	3.4 mm	3.2 – 3.6
Diametro interno innesto mm	87.9 mm	87.7 – 88.3
Gioco radiale per lato sui supporti mm	0.3 mm	0.2 – 0.5
Gioco assiale per lato denti mm	0.3 mm	0.2 – 0.5
Gioco tra facce esagoni mm	0.4 mm	0.2 – 0.6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS