Enclosures and housings
Retro Handheld Music Player - Case & Encoder Knob
- Bounding box
- 70 × 100 × 22 mm
- Engine
- 3D Printing B-rep
- Parameters
- 37
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
could you please just design the outer case instead of the entire omponenets, just the exterior and the knob for the rotary econder. use the values from online for the internal components
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded view gap, 0 = assembled | 0 mm | 0 – 60 |
| Enclosure width | 70 mm | 40 – 120 |
| Enclosure height | 100 mm | 60 – 160 |
| Front shell depth | 12 mm | 6 – 20 |
| Rear cover plate thickness | 7 mm | 3 – 15 |
| Body corner radius | 8 mm | 2 – 20 |
| Wall thickness | 2 mm | 1.2 – 5 |
| Screw boss diameter | 6 mm | 4 – 10 |
| Boss inset from outer edge | 8 mm | 5 – 16 |
| Cover screw clearance hole | 2.8 mm | 2 – 4 |
| Boss pilot hole | 2.2 mm | 1.5 – 3.5 |
| Rear cover lip height | 2 mm | 1 – 5 |
| Rear cover lip wall width | 2 mm | 1 – 4 |
| Sliding fit clearance per side | 0.25 mm | 0.1 – 0.5 |
| Screen centre height offset | 12 mm | -20 – 40 |
| Screen window width | 40 mm | 20 – 60 |
| Screen window height | 52 mm | 20 – 80 |
| Bezel recess width | 50 mm | 24 – 66 |
| Bezel recess height | 60 mm | 30 – 90 |
| Bezel recess depth | 1.2 mm | 0.2 – 3 |
| Button row height offset | -28 mm | -45 – -5 |
| Button spacing | 11 mm | 8 – 20 |
| Button counterbore depth | 1.5 mm | 0.5 – 3 |
| Button through hole | 6.2 mm | 4 – 9 |
| Encoder X on rear cover | 17 mm | -30 – 30 |
| Encoder Y on rear cover | 30 mm | 0 – 45 |
| EC11 body width | 12 mm | 8 – 20 |
| Encoder D-shaft diameter | 6 mm | 3 – 8 |
| Knob diameter | 14 mm | 8 – 24 |
| Knob height | 6 mm | 3 – 12 |
| Thumb recess diameter | 22 mm | 14 – 36 |
| Thumb recess depth | 2.5 mm | 0.5 – 6 |
| USB opening width | 9 mm | 5 – 14 |
| USB opening height | 7 mm | 3 – 12 |
| Power switch width | 8 mm | 4 – 14 |
| Power switch height | 4 mm | 2 – 10 |
| 3.5 mm jack body diameter | 6 mm | 4 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,