Brackets and mounts
Resonance Speaker Base
- Bounding box
- 150.1 × 150.0 × 39.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Design a parametric 3D model for a "resonance speaker base" intended for 3D printing or CNC prototyping. The design must be functional, manufacturable, and aesthetically driven by a geometric logo. **Core Dimensions & Constraints:** - **Footprint:** The total base diameter should be approximately 120–150 mm to provide stability for a 1-litre bottle. - **Bottle Platform:** Create a central, recessed circular platform to seat a bottle or glass. The recess diameter must be 85 mm (to accommodate a Voss-style bottle base) with a depth of 2 mm. The platform surface itself must be as flat and rigid as possible to ensure maximum vibration transfer. - **Material & Wall Thickness:** Assume the model will be printed in a rigid material (like PLA or PETG) or machined from aluminium. Use a minimum wall thickness of 2.5 mm for structural integrity. **Internal Component Housing (The "Vibration Engine"):** - **Transducer Mount:** Design a circular mounting boss on the **underside** of the central bottle platform. This boss should have a diameter of 45 mm to fit a standard surface exciter (like the Dayton Audio DAEX25). Include a 1 mm deep recess for epoxy bonding and a central cable routing hole (6 mm diameter) to pass wires to the amplifier. - **Amplifier Bay:** Create a rectangular internal compartment (approx. 60 x 40 x 20 mm) adjacent to the transducer mount to house a small Bluetooth amplifier board (e.g., Dayton KABM-30M). Include cutouts for a USB-C power input and a power switch on the outer wall. - **Vibration Isolation:** Design small, cylindrical standoffs (5 mm diameter, 3 mm height) at the four corners of the base's underside. These are for attaching rubber feet to decouple the device from the table and direct vibration upward into the bottle. **Aesthetic & Branding:** - **Logo Integration:** The outer wall of the base should feature a recessed or embossed version of the geometric logo: [DESCRIBE YOUR GEOMETRIC LOGO HERE]. The logo should be debossed to a depth of 1.5 mm so it can be filled with paint or left as a shadow line. - **Form Factor:** The overall shape should be a clean, minimal cylinder with a subtle chamfer on the top and bottom edges. Avoid complex curves that are difficult to manufacture. **Output:** Generate a parametric model (STEP/STL) where the bottle recess diameter, logo depth, and internal mount dimensions are named variables that can be easily adjusted.
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 150 mm | 120 – 200 |
| Base body height | 36 mm | 30 – 80 |
| Minimum wall thickness | 2.5 mm | 1.5 – 8 |
| Bottle recess diameter | 85 mm | 50 – 120 |
| Bottle recess depth | 2 mm | 0.5 – 6 |
| Transducer boss diameter | 45 mm | 20 – 70 |
| Transducer boss height | 2 mm | 1 – 8 |
| Epoxy recess diameter | 38 mm | 10 – 60 |
| Epoxy recess depth | 1 mm | 0.5 – 3 |
| Cable hole diameter | 6 mm | 2 – 12 |
| Amplifier bay length | 50 mm | 20 – 70 |
| Amplifier bay width | 34 mm | 20 – 60 |
| Amplifier bay depth | 20 mm | 10 – 30 |
| USB-C cutout width | 9 mm | 4 – 20 |
| USB-C cutout height | 3.5 mm | 1 – 10 |
| Switch cutout width | 8 mm | 3 – 20 |
| Switch cutout height | 4 mm | 1 – 10 |
| Logo outer diameter | 20 mm | 10 – 50 |
| Logo inner diameter | 13 mm | 4 – 45 |
| Logo deboss depth | 1.5 mm | 0.5 – 3 |
| Foot standoff diameter | 5 mm | 2 – 12 |
| Foot standoff height | 3 mm | 1 – 10 |
| Foot pitch diameter | 110 mm | 70 – 180 |
| Edge chamfer | 2 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
