Enclosures and housings
Reservoir with R1 Snap-Fit Supports and Separate Roller R2
- Bounding box
- 120.0 × 55.0 × 175.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the current model only. Keep the reservoir, slots, Roller R1 and both R1 snap-fit supports unchanged. Add one new separate cylindrical roller named R2 inside the upper dry zone. ROLLER R2 - diameter = 18 mm - length = 106 mm - cylinder axis parallel to X - center X = 60 mm - extends from X = 7 mm to X = 113 mm - axis Y = 18 mm - axis Z = 160 mm R2 must remain a completely separate solid body. Do not create an axial bore yet. Do not create supports, shaft, motor, coupling or surface texture. Do not modify any existing geometry. Do not merge R2 with the reservoir or Roller R1. Do not add any other feature.
Parameters
| Name | Value | Range |
|---|---|---|
| Reservoir Width (X) | 120 mm | 60 – 300 |
| Reservoir Height (Z) | 175 mm | 60 – 400 |
| Back Wall Y at Bottom | 55 mm | 10 – 200 |
| Back Wall Y at Mid Z | 55 mm | 10 – 200 |
| Back Wall Y at Top | 55 mm | 10 – 200 |
| Back Slope Break Z | 100 mm | 10 – 300 |
| Wall Thickness | 3 mm | 1 – 10 |
| Bottom Thickness | 4 mm | 1 – 15 |
| Left Support X Start | 3 mm | 0 – 60 |
| Right Support X Start | 114 mm | 60 – 300 |
| Support Thickness (X) | 3 mm | 1 – 15 |
| Support Y Front | 5.9 mm | 0 – 80 |
| Support Y Back | 14.4 mm | 0 – 100 |
| Support Z Bottom | 9.8 mm | 0 – 100 |
| Support Z Top | 16 mm | 0 – 120 |
| R1 Shaft Axis Y | 10.14 mm | 0 – 80 |
| R1 Shaft Axis Z | 14 mm | 0 – 100 |
| Snap-Fit Seat Diameter | 3.4 mm | 1 – 30 |
| Snap Opening Width (Y) | 2.6 mm | 0.5 – 20 |
| Slot Width (X) | 30 mm | 5 – 100 |
| Slot Height (Z) | 10 mm | 2 – 60 |
| Slot Center X | 60 mm | 0 – 300 |
| Lower Slot Center Z | 45 mm | 0 – 300 |
| Upper Slot Center Z | 70 mm | 0 – 300 |
| R1 Center X | 60 mm | 0 – 300 |
| R1 Length (X) | 106 mm | 10 – 300 |
| R1 Diameter | 3 mm | 1 – 30 |
| R1 Axial Bore | 1 mm | 0.5 – 20 |
| R2 Diameter | 18 mm | 4 – 60 |
| R2 Length (X) | 106 mm | 10 – 300 |
| R2 Center X | 60 mm | 0 – 300 |
| R2 Axis Y | 18 mm | 0 – 200 |
| R2 Axis Z | 160 mm | 0 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no