Enclosures and housings
Reservoir with Guide Fillet and Rollers
- Bounding box
- 120.0 × 70.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the current model only. Keep completely unchanged: - reservoir external geometry - reservoir height 180 mm - both slots dimensions and positions - Roller R1 - R1 snap-fit supports - Roller R2 Modify only the INNER LOWER EDGE of the lower slot at Z = 132 mm. Add a continuous rounded guide radius along the full 103 mm slot width. Guide: - fillet radius = 1.5 mm - apply only to the inner lower edge of the slot - the external slot opening must remain unchanged - the slot width must remain 103 mm - the slot height at the external face must remain 3.8 mm The purpose is to create a smooth internal surface for the moving ribbon. Do not modify the upper slot. Do not add rollers or separate guide parts. Do not add shafts, motor, cover, drain or other features. Do not merge R1 or R2 with the reservoir.
Parameters
| Name | Value | Range |
|---|---|---|
| Reservoir width X | 120 mm | 50 – 300 |
| Reservoir height Z | 180 mm | 50 – 400 |
| Wall thickness | 3 mm | 1 – 10 |
| Bottom thickness | 4 mm | 1 – 10 |
| Rear Y at Z=0 | 20 mm | 5 – 100 |
| Rear Y at Z=100 | 22 mm | 5 – 100 |
| Rear knee Z | 100 mm | 10 – 200 |
| Rear Y at Z=180 | 70 mm | 5 – 200 |
| Slot total width X | 103 mm | 10 – 115 |
| Slot total height Z | 3.8 mm | 1 – 10 |
| Lower slot center Z | 132 mm | 0 – 178 |
| Upper slot center Z | 148 mm | 0 – 178 |
| Left support X start | 3 mm | 0 – 117 |
| Left support X end | 6 mm | 0 – 117 |
| Right support X start | 114 mm | 0 – 117 |
| Right support X end | 117 mm | 0 – 117 |
| Support Y min | 5.9 mm | 0 – 50 |
| Support Y max | 14.4 mm | 0 – 50 |
| Support Z min | 9.8 mm | 0 – 100 |
| Support Z max | 16 mm | 0 – 100 |
| Seat diameter | 3.4 mm | 1 – 20 |
| Seat axis Y | 10.14 mm | 0 – 50 |
| Seat axis Z | 14 mm | 0 – 100 |
| Snap-fit opening width along Y | 2.6 mm | 0.5 – 10 |
| R1 X start | 7 mm | 0 – 120 |
| R1 length | 106 mm | 10 – 200 |
| R1 diameter | 8 mm | 1 – 50 |
| R1 axis Y | 10.14 mm | 0 – 100 |
| R1 axis Z | 14 mm | 0 – 200 |
| R1 bore diameter | 3.4 mm | 0.5 – 20 |
| R2 X start | 7 mm | 0 – 120 |
| R2 length | 106 mm | 10 – 200 |
| R2 diameter | 18 mm | 1 – 100 |
| R2 axis Y | 18 mm | 0 – 100 |
| R2 axis Z | 160 mm | 0 – 200 |
| Lower slot inner guide radius | 1.5 mm | 0.1 – 1.8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no