Enclosures and housings
Remote Case
- Bounding box
- 74 × 29 × 30 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 3D model of a case for a remote with two 18 mm by 18 mm buttons each on top and two small buttons on the side. The case needs to be 74mm long by 25 mm wide by 30 mm tall. The battery is 20x50x10 mm and should be on the bottom with a 21mm by 18mm esp32-c6 above it. There should be a 1mm wall between the two. There should be a platform on top of the battery and esp32-c6 separating the buttons from the battery and esp32-c6. There are two square 18mm by 18mm buttons on top of the case that go on top of push buttons and two small buttons on the side that also go on top of two push buttons. The case should have two halves with the platform in between
Parameters
| Name | Value | Range |
|---|---|---|
| Case length | 74 mm | 60 – 120 |
| Case width | 25 mm | 15 – 50 |
| Assembled case height | 30 mm | 20 – 60 |
| Bottom shell height | 15 mm | 8 – 25 |
| Mid platform thickness | 1.5 mm | 1 – 4 |
| Case wall thickness | 1.5 mm | 1.2 – 4 |
| Bottom floor thickness | 1 mm | 0.6 – 3 |
| Battery length along case | 50 mm | 20 – 80 |
| Battery width | 20 mm | 10 – 40 |
| Battery height | 10 mm | 5 – 20 |
| Battery/ESP separator length | 22 mm | 15 – 40 |
| Battery/ESP separator width | 19 mm | 15 – 40 |
| Separator wall thickness | 1 mm | 0.6 – 3 |
| ESP32-C6 board length | 21 mm | 15 – 40 |
| ESP32-C6 board width | 18 mm | 10 – 30 |
| ESP32-C6 board thickness | 3 mm | 1 – 6 |
| Top button size | 18 mm | 10 – 30 |
| Top button visible height | 4 mm | 2 – 8 |
| Top button center offset from case center | 18 mm | 10 – 40 |
| Top tactile push button size | 6 mm | 4 – 12 |
| Top tactile push button height | 3 mm | 1 – 6 |
| Side button length along case | 8 mm | 4 – 20 |
| Side button vertical size | 5 mm | 3 – 12 |
| Side button outward depth | 4 mm | 2 – 8 |
| Side tactile push button face size | 4 mm | 3 – 8 |
| Side tactile push button depth | 2 mm | 1 – 5 |
| Top button plunger diameter | 8 mm | 4 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,