Enclosures and housings
RedMagic 9S Pro Liquid Cooling Chamber
- Bounding box
- 108.0 × 76.0 × 21.5 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create an editable 3D CAD model of a custom liquid cooling chamber for the RedMagic 9S Pro phone. Requirements: - Square chamber: 76 × 76 × 7 mm (editable dimensions). - Internal connected serpentine water channels. - One inlet and one outlet on opposite sides. - Circular copper contact plate: 71 mm diameter. - Separate aluminum heatsink: 40 × 40 × 10 mm with cooling fins. - Removable sealed cover with an O-ring groove. - Keep the copper plate and heatsink on opposite faces. - Create separate editable parts and a complete assembly. - Show internal water channels in a cross-section. - Design for real 3D printing, not just a visual render. - Export STEP and STL files. - Do not invent dimensions; mark unverified measurements as provisional. - Check part alignment and interference.
Parameters
| Name | Value | Range |
|---|---|---|
| Chamber width/length | 76 mm | 40 – 200 |
| Chamber height | 7 mm | 3 – 30 |
| Channel width | 4 mm | 1 – 12 |
| Channel depth | 5 mm | 1 – 6 |
| Channel pitch | 8 mm | 4 – 20 |
| Serpentine passes | 5 count | 3 – 15 |
| Channel edge margin | 8 mm | 3 – 20 |
| Port bore diameter | 4 mm | 1 – 12 |
| Boss outer diameter | 10 mm | 5 – 30 |
| Boss length | 8 mm | 2 – 30 |
| Fitting outer diameter | 8 mm | 3 – 30 |
| Fitting length | 8 mm | 2 – 40 |
| Fitting bore | 4 mm | 1 – 20 |
| O-ring groove width | 2.5 mm | 1 – 8 |
| O-ring groove depth | 1.5 mm | 0.5 – 4 |
| Groove edge offset | 4 mm | 1 – 12 |
| O-ring cord diameter | 2.2 mm | 1 – 8 |
| Cover groove width | 2.8 mm | 1 – 10 |
| Cover groove depth | 0.6 mm | 0.1 – 4 |
| Copper plate diameter | 71 mm | 10 – 150 |
| Copper plate thickness | 2 mm | 0.5 – 10 |
| Plate recess diameter | 71.5 mm | 10 – 150 |
| Plate recess depth | 1.5 mm | 0.2 – 8 |
| Cover thickness | 3 mm | 1 – 15 |
| Cover screw inset | 10 mm | 3 – 25 |
| Cover screw clearance | 3.2 mm | 1 – 10 |
| Body screw hole diameter | 3.2 mm | 1 – 10 |
| Body screw depth | 5 mm | 1 – 15 |
| Screw shank diameter | 3 mm | 1 – 10 |
| Screw head diameter | 5.5 mm | 2 – 20 |
| Screw head height | 2 mm | 0.5 – 8 |
| Heatsink width/length | 40 mm | 10 – 120 |
| Heatsink base thickness | 3 mm | 1 – 20 |
| Fin count | 5 count | 1 – 20 |
| Fin thickness | 1.5 mm | 0.5 – 8 |
| Fin height | 7 mm | 1 – 40 |
| Fin pitch | 8 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
