Enclosures and housings
Rectangular Tablet Case Lid
- Bounding box
- 292 × 176 × 10.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
"Create a rectangular tablet case lid 292 mm wide, 176 mm deep, and 10.5 mm tall with 3 mm rounded outer corners. From the top face, cut a centered rectangular pocket 257.7 mm wide, 169.3 mm deep, and 8 mm deep, leaving a 2.5 mm solid back wall. Cut a 16 mm by 9 mm rectangular charging port hole centered on the right outer wall. Cut an 8 mm circular headphone hole near the bottom-right corner on the right wall. Cut a 45 mm by 5 mm button slot on the top outer wall, 25 mm from the top-left corner. Cut two 25 mm by 4 mm speaker slots on both the left and right outer walls. Cut a 20 mm by 20 mm camera hole through the back wall in the upper-right corner."
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width, X | 292 mm | 50 – 400 |
| Overall depth, Y | 176 mm | 50 – 400 |
| Overall height, Z | 10.5 mm | 5 – 50 |
| Pocket width, X | 257.7 mm | 10 – 390 |
| Pocket depth, Y | 169.3 mm | 10 – 390 |
| Pocket depth from top face | 8 mm | 1 – 49 |
| Outer corner radius | 3 mm | 0 – 20 |
| Pocket corner radius | 1.5 mm | 0 – 10 |
| Port width, Y | 16 mm | 2 – 40 |
| Port height, Z | 9 mm | 2 – 20 |
| Jack hole diameter | 8 mm | 2 – 20 |
| Jack centre, Y | -76 mm | -160 – -20 |
| Slot length, X | 45 mm | 5 – 100 |
| Slot height, Z | 5 mm | 1 – 15 |
| Offset from top-left corner | 25 mm | 2 – 100 |
| Slot length, Y | 25 mm | 5 – 60 |
| Slot height, Z | 4 mm | 1 – 10 |
| First slot centre, Y | -55 mm | -80 – 0 |
| Second slot centre, Y | -25 mm | -80 – 0 |
| Square hole size | 20 mm | 4 – 60 |
| Inset from pocket corner | 5 mm | 0 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,