Brackets and mounts
Rectangular Photo Frame
- Bounding box
- 200 × 150 × 10 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
“Generate an OpenSCAD script for a rectangular photo frame that is 200mm wide, 150mm tall, and 10mm thick. Include a central cutout of 152mm by 102mm, a rear slide-in clearance slot for photos, and two keyhole mounting slots on the back. Output ONLY valid OpenSCAD code inside a markdown code block.”
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 200 mm | 150 – 300 |
| Height | 150 mm | 100 – 250 |
| Thickness | 10 mm | 6 – 30 |
| Window width | 152 mm | 80 – 280 |
| Window height | 102 mm | 80 – 230 |
| Front window cut depth | 6 mm | 2 – 8 |
| Rear slide-in slot depth | 6 mm | 2 – 8 |
| Photo clearance each side | 0.5 mm | 0.2 – 1 |
| Keyhole spacing from centre | 55 mm | 20 – 90 |
| Keyhole vertical centre | -64 mm | -74 – -20 |
| Keyhole head diameter | 8 mm | 6 – 12 |
| Keyhole shank width | 4 mm | 3 – 6 |
| Keyhole slot length | 10 mm | 8 – 20 |
| Keyhole depth | 4 mm | 2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl