Enclosures and housings
Rectangular Base with Pocket Patterns
- Bounding box
- 85.0 × 239.0 × 82.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a solid rectangular base block that is 85 mm wide, 239 mm long, and 82 mm tall. We will remove material using two distinct linear patterns of pocket cuts on the top face. All pocket cuts are 66 mm wide, 4 mm long (front-to-back), and 80 mm deep. Pattern A (Left aligned): Create 17 pockets. Align these so they sit exactly 2 mm from the left edge of the block. Array them linearly along the length. The first pocket starts 2 mm from the front edge. Space them with a 14 mm center-to-center pitch. Pattern B (Right aligned): Create 17 pockets. Align these so they sit exactly 2 mm from the right edge of the block. Array them linearly along the length. Offset this pattern so the first pocket starts exactly 9 mm from the front edge. Space them with a 14 mm center-to-center pitch.
Parameters
| Name | Value | Range |
|---|---|---|
| Block Width | 85 mm | 10 – 500 |
| Block Length | 239 mm | 10 – 1000 |
| Block Height | 82 mm | 10 – 500 |
| Pocket Width | 66 mm | 1 – 400 |
| Pocket Length | 4 mm | 1 – 50 |
| Pocket Depth | 80 mm | 1 – 400 |
| Left Offset (Pattern A) | 2 mm | 0 – 50 |
| Front Offset (Pattern A) | 2 mm | 0 – 100 |
| Right Offset (Pattern B) | 2 mm | 0 – 50 |
| Front Offset (Pattern B) | 9 mm | 0 – 100 |
| Pitch | 14 mm | 5 – 200 |
| Number of Pockets (each pattern) | 17 | 1 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no