Enclosures and housings
realme 16x 5G TPU Phone Case
- Bounding box
- 170.1 × 81.8 × 11.5 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a production-ready, parametric CAD model of a protective phone case for the realme 16x 5G. Use the verified phone dimensions: - Length: 166.47 mm - Width: 78.23 mm - Thickness: 8.88 mm Design a precise TPU case with: - 0.30 mm internal clearance - 1.50 mm wall thickness - 0.80 mm raised screen lip - Rounded corners and edges - Accurate camera cutout - Accurate power/volume buttons - Accurate USB-C, speaker, microphone, SIM and headphone-jack openings where applicable Do not guess any feature dimensions or positions. Use verified realme references where available. Make unknown dimensions editable parameters marked “MEASURE REQUIRED.” Create a fully parametric model suitable for 3D printing/manufacturing, with STEP + STL output and front, back, left, right, top and bottom orthographic views. Perform an interference/clearance check before finalizing.
Parameters
| Name | Value | Range |
|---|---|---|
| Phone Length | 166.47 mm | 150 – 180 |
| Phone Width | 78.23 mm | 70 – 90 |
| Phone Thickness | 8.88 mm | 6 – 12 |
| Phone Corner Radius (MEASURE REQUIRED) | 8 mm | 4 – 15 |
| Internal Clearance | 0.3 mm | 0.1 – 1 |
| Wall Thickness | 1.5 mm | 0.8 – 3 |
| Screen Lip Height | 0.8 mm | 0.3 – 2 |
| Screen Lip Width (MEASURE REQUIRED) | 3 mm | 1.5 – 5 |
| Camera X Offset from Center (MEASURE REQUIRED) | 55 mm | 30 – 80 |
| Camera Y Offset from Center (MEASURE REQUIRED) | 0 mm | -30 – 30 |
| Camera Cutout Width (MEASURE REQUIRED) | 30 mm | 10 – 60 |
| Camera Cutout Height (MEASURE REQUIRED) | 20 mm | 10 – 50 |
| Camera Cutout Corner Radius (MEASURE REQUIRED) | 5 mm | 1 – 10 |
| Power Button Z Offset from Phone Back (MEASURE REQUIRED) | 4 mm | 1 – 7 |
| Power Button Width (MEASURE REQUIRED) | 8 mm | 5 – 15 |
| Power Button Height (MEASURE REQUIRED) | 4 mm | 2 – 8 |
| Volume Button #1 Z Offset from Phone Back (MEASURE REQUIRED) | 3.5 mm | 1 – 7 |
| Volume Button #2 Z Offset from Phone Back (MEASURE REQUIRED) | 6 mm | 1 – 7 |
| Volume Button Width (MEASURE REQUIRED) | 6 mm | 3 – 12 |
| Volume Button Height (MEASURE REQUIRED) | 3 mm | 1.5 – 6 |
| USB-C Z Offset from Phone Back (MEASURE REQUIRED) | 4.5 mm | 1 – 7 |
| USB-C Cutout Width (MEASURE REQUIRED) | 10 mm | 6 – 15 |
| USB-C Cutout Height (MEASURE REQUIRED) | 3.5 mm | 2 – 6 |
| Speaker Grill Y Offset from Center (MEASURE REQUIRED) | 15 mm | 5 – 30 |
| Speaker Grill Width (MEASURE REQUIRED) | 5 mm | 3 – 10 |
| Speaker Grill Height (MEASURE REQUIRED) | 2.5 mm | 1 – 5 |
| Microphone Y Offset from Center (MEASURE REQUIRED) | -15 mm | -30 – 0 |
| Microphone Hole Diameter (MEASURE REQUIRED) | 1.5 mm | 0.5 – 3 |
| SIM Tray Z Offset from Phone Back (MEASURE REQUIRED) | 2 mm | 1 – 7 |
| SIM Tray Width (MEASURE REQUIRED) | 12 mm | 6 – 20 |
| SIM Tray Height (MEASURE REQUIRED) | 2 mm | 1 – 4 |
| Headphone Jack X Offset from Center (MEASURE REQUIRED) | 0 mm | -40 – 40 |
| Headphone Jack Width (set 0 to disable) (MEASURE REQUIRED) | 4 mm | 0 – 10 |
| Headphone Jack Height (MEASURE REQUIRED) | 3 mm | 0 – 8 |
| Headphone Jack Z Offset from Phone Back (MEASURE REQUIRED) | 4 mm | 1 – 7 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox