Enclosures and housings
Reactor Desk Organizer – Enclosed Shell
- Bounding box
- 180.0 × 161.0 × 103.0 mm
- Engine
- Precision B-rep
- Parameters
- 44
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model only. Make the model fully enclosed and complete on the outside. It should NOT look halved, sliced, or like a cross-section. Keep the existing futuristic reactor design, details, proportions, mechanical arms, base, and overall style. Close all unnecessary cutaway surfaces so the exterior forms a complete shell. The inside should only be visible through intentional openings such as the central reactor aperture, vents, and small windows. Do not redesign the whole object. Preserve the existing geometry wherever possible and only modify the parts necessary to remove the cutaway/half-model appearance. Keep the model manifold and suitable for FDM 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 180 mm | 100 – 300 |
| Base depth | 140 mm | 80 – 220 |
| Base height | 10 mm | 4 – 30 |
| Cable channel width | 14 mm | 6 – 30 |
| Cable channel depth | 6 mm | 2 – 15 |
| Rear recess diameter | 30 mm | 10 – 60 |
| Rear recess depth | 15 mm | 5 – 30 |
| Cover width | 160 mm | 90 – 250 |
| Cover depth | 130 mm | 70 – 200 |
| Cover thickness | 3 mm | 1.2 – 10 |
| Storage lid diameter | 38 mm | 20 – 70 |
| Lid thickness | 4 mm | 1.2 – 12 |
| Hex frame outer radius (vertex) | 75 mm | 50 – 120 |
| Frame wall thickness | 8 mm | 3 – 16 |
| Frame height | 90 mm | 50 – 150 |
| Core outer diameter | 40 mm | 20 – 80 |
| Core inner diameter (aperture) | 28 mm | 10 – 70 |
| Core height | 50 mm | 30 – 80 |
| Glow ring outer dia | 46 mm | 25 – 90 |
| Glow ring inner dia | 38 mm | 15 – 85 |
| Glow ring height | 6 mm | 1.2 – 15 |
| Number of arms | 6 | 3 – 8 |
| Arm length | 35 mm | 15 – 60 |
| Arm width | 8 mm | 2 – 16 |
| Arm thickness | 8 mm | 2 – 16 |
| Arm base radius (from center) | 25 mm | 10 – 60 |
| Arm tilt angle (deg) | 30 ° | -45 – 60 |
| Armor panel thickness | 4 mm | 1.2 – 10 |
| Panel width (along face) | 60 mm | 30 – 120 |
| Panel height | 60 mm | 30 – 100 |
| Vent inlay thickness | 3 mm | 1.2 – 10 |
| Vent width | 40 mm | 20 – 80 |
| Vent height | 30 mm | 15 – 50 |
| Vent bottom Z (from base top) | 5 mm | 0 – 50 |
| Vent slot count | 4 | 0 – 8 |
| Slot width | 4 mm | 1.2 – 15 |
| Slot height | 2 mm | 0.8 – 8 |
| Crown outer dia | 52 mm | 30 – 90 |
| Crown inner dia | 44 mm | 20 – 80 |
| Crown height | 8 mm | 2 – 20 |
| Knob count | 3 | 1 – 6 |
| Knob diameter | 8 mm | 3 – 16 |
| Knob height | 6 mm | 2 – 15 |
| Knob height above base | 70 mm | 20 – 140 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox