Brackets and mounts
RCT-100 Modular Enclosure Kit
- Bounding box
- 5706.5 × 326.0 × 150.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete 3D-printable electronics training board enclosure based on the RCT-100 design. Requirements: - Overall panel size: 410 × 330 mm. - Front height: 100 mm. - Rear height: 150 mm. - Bottom horizontal depth: 326 mm. - Sloped top panel length: approximately 330 mm. - Side wall thickness: 4 mm. - Bottom thickness: 4 mm. - Top control panel thickness: 3 mm. - Design as separate printable parts. - Maximum print bed size: 220 × 220 mm. - Divide large parts into smaller sections with screw connections and alignment features. - Include a removable bottom cover. - Leave internal space for a 62 × 52 × 50 mm transformer and power supply PCB. - Include mounting points for electronic modules. - Use millimeters. - Export editable STEP and 3D-printable STL files. Do not invent component hole positions. Preserve the original RCT-100 panel layout.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 410 mm | 300 – 600 |
| Overall Depth | 326 mm | 250 – 500 |
| Front Height | 100 mm | 60 – 180 |
| Rear Height | 150 mm | 80 – 250 |
| Wall Thickness | 4 mm | 2 – 8 |
| Bottom Cover Thickness | 4 mm | 2 – 8 |
| Top Panel Thickness | 3 mm | 2 – 8 |
| Front Side-Wall Segment Length | 170 mm | 100 – 250 |
| Top Tile Depth | 165 mm | 100 – 250 |
| Bottom Cover Tile Depth | 163 mm | 100 – 250 |
| Exploded Layout Gap | 30 mm | 5 – 100 |
| Screw Clearance Hole Diameter | 3.2 mm | 2 – 6 |
| Screw Hole Inset | 12 mm | 6 – 25 |
| Alignment Pin Diameter | 4 mm | 2 – 8 |
| Alignment Pin Length | 5 mm | 2 – 20 |
| Screw Boss Diameter | 8 mm | 5 – 16 |
| Screw Boss Protrusion | 1.5 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl