Brackets and mounts
RCT-100 Enclosure Kit
- Bounding box
- 4056.5 × 165.0 × 150.0 mm
- Engine
- Precision B-rep
- Parameters
- 58
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete 3D-printable electronics training board enclosure based on the RCT-100 design. Requirements: - Overall panel size: 410 × 330 mm. - Front height: 100 mm. - Rear height: 150 mm. - Bottom horizontal depth: 326 mm. - Sloped top panel length: approximately 330 mm. - Side wall thickness: 4 mm. - Bottom thickness: 4 mm. - Top control panel thickness: 3 mm. - Design as separate printable parts. - Maximum print bed size: 220 × 220 mm. - Divide large parts into smaller sections with screw connections and alignment features. - Include a removable bottom cover. - Leave internal space for a 62 × 52 × 50 mm transformer and power supply PCB. - Include mounting points for electronic modules. - Use millimeters. - Export editable STEP and 3D-printable STL files. Do not invent component hole positions. Preserve the original RCT-100 panel layout.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout gap | 30 mm | 5 – 200 |
| Top panel quadrant width | 205 mm | 100 – 300 |
| Top panel quadrant depth | 165 mm | 80 – 250 |
| Top panel thickness | 3 mm | 1 – 8 |
| Top panel screw hole dia | 3.2 mm | 1.5 – 6 |
| Top panel alignment hole dia | 3 mm | 1.5 – 6 |
| Top panel holes per edge | 3 count | 1 – 6 |
| Edge hole margin | 12 mm | 5 – 30 |
| Side wall section length | 163 mm | 50 – 250 |
| Side wall thickness | 4 mm | 2 – 10 |
| Front height | 100 mm | 40 – 200 |
| Rear height | 150 mm | 40 – 250 |
| Side mid-joint height | 125 mm | 40 – 225 |
| Wall screw hole dia | 3.2 mm | 1.5 – 6 |
| Wall alignment hole dia | 3 mm | 1.5 – 6 |
| Front wall half width | 205 mm | 80 – 300 |
| Front wall height | 100 mm | 40 – 200 |
| Rear wall half width | 205 mm | 80 – 300 |
| Rear wall height | 150 mm | 40 – 250 |
| Wall thickness | 4 mm | 2 – 10 |
| Wall holes per edge | 3 count | 1 – 6 |
| Bottom quadrant width | 205 mm | 80 – 300 |
| Bottom quadrant depth | 163 mm | 60 – 250 |
| Bottom cover thickness | 4 mm | 2 – 10 |
| Bottom tongue length | 10 mm | 3 – 30 |
| Bottom tongue width | 3 mm | 1 – 12 |
| Bottom notch clearance | 0.4 mm | 0.1 – 2 |
| Bottom screw hole dia | 3.2 mm | 1.5 – 6 |
| Bottom alignment hole dia | 3 mm | 1.5 – 6 |
| Bottom screw holes per edge | 3 count | 1 – 6 |
| Transformer pocket width | 62 mm | 30 – 150 |
| Transformer pocket depth | 52 mm | 30 – 150 |
| Transformer pocket height | 50 mm | 20 – 120 |
| Retention wall thickness | 4 mm | 2 – 10 |
| Retention base thickness | 4 mm | 2 – 10 |
| Retention boss dia | 8 mm | 3 – 20 |
| Retention boss height | 6 mm | 2 – 20 |
| Retention screw hole dia | 3.2 mm | 1.5 – 6 |
| PSU rail length | 90 mm | 30 – 200 |
| PSU rail width | 20 mm | 5 – 60 |
| PSU rail thickness | 4 mm | 2 – 10 |
| PSU boss dia | 8 mm | 3 – 20 |
| PSU boss height | 6 mm | 2 – 20 |
| PSU screw hole dia | 3.2 mm | 1.5 – 6 |
| PSU boss count | 2 count | 1 – 6 |
| Module rail length | 120 mm | 30 – 250 |
| Module rail width | 12 mm | 5 – 60 |
| Module rail thickness | 4 mm | 2 – 10 |
| Module boss dia | 8 mm | 3 – 20 |
| Module boss height | 6 mm | 2 – 20 |
| Module screw hole dia | 3.2 mm | 1.5 – 6 |
| Module boss count | 3 count | 1 – 8 |
| Join screw shank dia | 3 mm | 1.5 – 6 |
| Join screw length | 10 mm | 4 – 30 |
| Join screw head dia | 5.5 mm | 2 – 15 |
| Join screw head height | 2 mm | 1 – 8 |
| Alignment pin dia | 3 mm | 1.5 – 8 |
| Alignment pin length | 8 mm | 3 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl