Raspberry Pi Handheld Gameboy Shell

1 views

Bounding box: 108 × 150 × 18 mm
Engine: 3D Printing B-rep
Parameters: 22
Published: November 12, 2026

Download

Free to download and use. See the terms.

The prompt

mach den bildschirm queerformat, eine kleine öffnung im rand, eine klickfunktion die stabil ist und man immer wieder auf und zu machen kann

Parameters

Name	Value	Range
Case width	108 mm	80 – 150
Case height	150 mm	120 – 190
Front half depth	12 mm	8 – 20
Back half depth	14 mm	8 – 20
Wall thickness	2.5 mm	1.2 – 5
Display diagonal (inches)	2.8 mm	2 – 7
Display width/height ratio	1.35 mm	0.5 – 2
Display opening extra border	2.5 mm	1 – 8
Action button hole diameter	8 mm	6 – 12
D-pad button hole diameter	9 mm	6 – 14
Button radial clearance	0.25 mm	0.1 – 0.6
Mounting boss outer diameter	5.5 mm	3 – 10
Mounting boss pilot hole	3.2 mm	2 – 5.5
Screw clearance hole diameter	3.4 mm	3 – 5.5
Front boss height above face	6 mm	4 – 12
Outer corner radius	12 mm	4 – 30
Edge opening width	12 mm	6 – 20
Edge opening height	3 mm	2 – 8
Edge opening Y position	50 mm	10 – 80
Snap tab width	10 mm	6 – 16
Snap tab engagement height	4 mm	2 – 6
Snap fit clearance	0.25 mm	0.1 – 0.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS