Raspberry Pi Handheld Gameboy Shell

1 views

Bounding box: 108 × 150 × 14 mm
Engine: 3D Printing B-rep
Parameters: 16
Published: November 12, 2026

Download

Free to download and use. See the terms.

The prompt

ich brauch ein gameboy gehäuse für ein raspberry projekt bildschirm 2.8" 6 knöpfe gutes handheld design

Parameters

Name	Value	Range
Case width	108 mm	80 – 150
Case height	150 mm	120 – 190
Front half depth	12 mm	8 – 20
Back half depth	14 mm	8 – 20
Wall thickness	2.5 mm	1.2 – 5
Display diagonal (inches)	2.8 mm	2 – 7
Display width/height ratio	0.75 mm	0.5 – 1.5
Display opening extra border	2.5 mm	1 – 8
Action button hole diameter	8 mm	6 – 12
D-pad button hole diameter	9 mm	6 – 14
Button radial clearance	0.25 mm	0.1 – 0.6
Mounting boss outer diameter	5.5 mm	3 – 10
Mounting boss pilot hole	3.2 mm	2 – 5.5
Screw clearance hole diameter	3.4 mm	3 – 5.5
Front boss height above face	6 mm	4 – 12
Outer corner radius	12 mm	4 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS