Enclosures and housings
Rampa plegable ATV 220 kg
- Bounding box
- 1175.0 × 400.0 × 351.8 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
"Genera un modelo 3D paramétrico de una rampa metálica vehicular plegable y facil de guardar, para una cuatrimoto de 220 kg. La rampa debe tener un ancho de 400 mm y una altura inicial a salvar de 300 mm (30 cm) en su extremo superior. Añade largueros laterales de refuerzo con una altura de 50 mm a los costados para evitar salidas de rueda, y una superficie con patrón de malla o ranuras antideslizantes espaciadas cada 100 mm a lo largo de la plataforma."
Parameters
| Name | Value | Range |
|---|---|---|
| Ancho de la rampa | 400 mm | 200 – 800 |
| Longitud de cada hoja | 600 mm | 300 – 1200 |
| Espesor de chapa | 3 mm | 1.5 – 8 |
| Angulo de inclinacion | 14.5 deg | 5 – 35 |
| Separacion de ranuras | 100 mm | 30 – 300 |
| Ancho de ranura | 8 mm | 2 – 25 |
| Profundidad de ranura | 1.2 mm | 0.3 – 2.5 |
| Altura del larguero sobre la plataforma | 50 mm | 20 – 150 |
| Espesor del larguero | 5 mm | 2 – 20 |
| Longitud del larguero | 600 mm | 200 – 1200 |
| Longitud de bisagra | 100 mm | 40 – 250 |
| Ancho de bisagra | 50 mm | 20 – 120 |
| Espesor de bisagra | 10 mm | 4 – 30 |
| Diametro del pasador | 8 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no