Mechanical parts
Ram Coin
- Bounding box
- 60 × 60 × 5.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Ontwerp een 3D-printbare decoratieve gouden munt met een reliëf van een krachtige ramskop in het midden. De ram kijkt recht vooruit, met grote gekrulde hoorns en een gedetailleerde, symmetrische uitstraling. Eisen: - Ronde munt, 60 mm diameter en 4 mm dik. - Opstaande rand rondom de munt. - Ramskop als verhoogd reliëf van circa 1,5 mm. - Klassieke, luxe muntstijl met subtiele ornamenten of een lauwerkrans rond de ramskop. - Geschikt voor printen op een Bambu Lab P1S zonder ondersteuning. - Maak het model als één onderdeel, met afgeronde details die goed printbaar zijn. - Ontwerp in millimeters en lever een parametrisch CAD-model. Suggesties - Voeg tekst toe, bijvoorbeeld een jaartal, sterren of een eigen naam. - Kies een muntformaat dat bij je toepassing past, bijvoorbeeld 40, 60 of 80 mm. - Gebruik goudkleurig PLA Silk voor de gewenste uitstraling.
Parameters
| Name | Value | Range |
|---|---|---|
| Coin diameter | 60 mm | 30 – 120 |
| Coin body thickness | 4 mm | 2 – 8 |
| Raised rim width | 2.6 mm | 1.2 – 6 |
| Rim height above the field | 1.6 mm | 0.4 – 3 |
| Ram head relief height | 1.5 mm | 0.6 – 3 |
| Laurel wreath relief height | 0.8 mm | 0.3 – 2 |
| Year text height | 4.2 mm | 2 – 10 |
| Year struck on the coin | 2024 mm | 0 – 9999 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
