Enclosures and housings
Rain Catchment Funnel
- Bounding box
- 250.1 × 250.0 × 100.1 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D printable functional rain catchment funnel optimized for a 250mm by 250mm print bed. The total overall height of the model must not exceed 100mm. The top opening must be a wide circular rim with an outer diameter of exactly 250mm and a height of 60mm. The funnel tapers down smoothly to a cylindrical bottom outlet. The bottom outlet (connector) must have a length of exactly 40mm and an outer diameter of exactly 82mm to fit tightly inside a standard 3-inch PVC pipe. The wall thickness of the entire funnel must be exactly 3mm for mechanical strength and waterproofing. The model must be a watertight solid mesh with flat top and bottom faces, optimized for FDM 3D printing
Parameters
| Name | Value | Range |
|---|---|---|
| Top Outer Diameter | 250 mm | 200 – 250 |
| Top Rim Height | 60 mm | 10 – 80 |
| Bottom Outlet Outer Diameter | 82 mm | 70 – 100 |
| Bottom Outlet Length | 40 mm | 10 – 60 |
| Wall Thickness | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no