Enclosures and housings
Railway Track Monitor PCB
- Bounding box
- 100.0 × 70.0 × 13.6 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- October 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a professional 2D ELECTRONIC CIRCUIT SCHEMATIC for a Railway Track Monitoring Prototype. Use standard electrical symbols and connected wires, NOT a 3D model or solid shape. Components: ESP32 microcontroller, IR obstacle detection sensor, vibration sensor, voltage regulator, DC power supply, status LEDs, and buzzer. Show component labels, pin numbers, power supply connections, GND, signal wires, and output connections. Use a clean white background with a readable engineering schematic layout. Generate an editable electrical circuit diagram, not a PCB enclosure.
Parameters
| Name | Value | Range |
|---|---|---|
| Board Length | 100 mm | 60 – 160 |
| Board Width | 70 mm | 50 – 120 |
| Board Thickness | 1.6 mm | 0.8 – 3 |
| Corner Radius | 3 mm | 0 – 8 |
| Mounting Hole Dia | 3.2 mm | 2 – 6 |
| Mount Hole Inset | 6 mm | 3 – 15 |
| Copper Trace Width | 0.8 mm | 0.3 – 2 |
| Copper Trace Thickness | 0.12 mm | 0.05 – 0.5 |
| ESP32 Length | 26 mm | 15 – 45 |
| ESP32 Width | 18 mm | 10 – 35 |
| ESP32 Height | 3 mm | 1 – 8 |
| IR Sensor Length | 14 mm | 6 – 30 |
| IR Sensor Width | 8 mm | 4 – 20 |
| IR Sensor Height | 10 mm | 3 – 20 |
| Vibration Sensor Size | 12 mm | 6 – 25 |
| Vibration Sensor Height | 4 mm | 1 – 12 |
| Regulator Body Length | 10 mm | 5 – 25 |
| Regulator Body Width | 5 mm | 3 – 15 |
| Regulator Height | 12 mm | 4 – 30 |
| DC Jack Length | 10 mm | 5 – 20 |
| DC Jack Width | 11 mm | 5 – 20 |
| DC Jack Height | 11 mm | 5 – 20 |
| Buzzer Diameter | 12 mm | 6 – 25 |
| Buzzer Height | 10 mm | 3 – 20 |
| Status LED Diameter | 5 mm | 2 – 10 |
| Status LED Height | 5 mm | 2 – 15 |
| LED Spacing | 8 mm | 4 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no